As INA bearings distributor, Nodes have INA track roller bearings in stock. INA track rollers are self-retaining, single or double row units with particularly thick-walled outer rings. These INA bearings can support axial forces in both directions as well as high radial forces. Track rollers bearing outer rings have a crowned or cylindrical outside surface. Designs with a crowned outside surface are used where there is misalignment in relation to the raceway and edge stresses must be avoided. The track rollers are available with an inner ring, with a stud and with a plastic tyre on the outer ring.
INA NNTR50X130X65-2ZL Yoke type track rollers
Nodes bearings have INA NNTR50X130X65-2ZL bearings in stock, Yoke type track rollers, NNTR50X130X65-2ZL bearings dimensions: 50mm x 130mm x 65mm, Cr: 193000N, C0r: 265000N, Full complement roller set, axial guidance, central rib, sealing shields with
- Brand: INA
- Inside Diameter: 50 mm
- Outside Diameter: 130 mm
- Width: 65 mm
- Basic dynamic load rating: 193 kN
- Basic static load rating: 193 kN
INA NNTR55X140X70-2ZL Yoke type track rollers
Nodes bearings have INA NNTR55X140X70-2ZL bearings in stock, Yoke type track rollers, NNTR55X140X70-2ZL bearings dimensions: 55mm x 140mm x 70mm, Cr: 226000N, C0r: 315000N, Full complement roller set, axial guidance, central rib, sealing shields with
- Brand: INA
- Inside Diameter: 55 mm
- Outside Diameter: 140 mm
- Width: 70 mm
- Basic dynamic load rating: 226 kN
- Basic static load rating: 226 kN
INA NNTR60X150X75-2ZL Yoke type track rollers
Nodes bearings have INA NNTR60X150X75-2ZL bearings in stock, Yoke type track rollers, NNTR60X150X75-2ZL bearings dimensions: 60mm x 150mm x 75mm, Cr: 255000N, C0r: 365000N, Full complement roller set, axial guidance, central rib, sealing shields with
- Brand: INA
- Inside Diameter: 60 mm
- Outside Diameter: 150 mm
- Width: 75 mm
- Basic dynamic load rating: 255 kN
- Basic static load rating: 255 kN
INA NNTR65X160X75-2ZL Yoke type track rollers
Nodes bearings have INA NNTR65X160X75-2ZL bearings in stock, Yoke type track rollers, NNTR65X160X75-2ZL bearings dimensions: 65mm x 160mm x 75mm, Cr: 280000N, C0r: 395000N, Full complement roller set, axial guidance, central rib, sealing shields with
- Brand: INA
- Inside Diameter: 65 mm
- Outside Diameter: 160 mm
- Width: 75 mm
- Basic dynamic load rating: 280 kN
- Basic static load rating: 280 kN
INA NNTR80X200X90-2ZL Yoke type track rollers
Nodes bearings have INA NNTR80X200X90-2ZL bearings in stock, Yoke type track rollers, NNTR80X200X90-2ZL bearings dimensions: 80mm x 200mm x 90mm, Cr: 415000N, C0r: 610000N, Full complement roller set, axial guidance, central rib, sealing shields with
- Brand: INA
- Inside Diameter: 80 mm
- Outside Diameter: 200 mm
- Width: 90 mm
- Basic dynamic load rating: 415 kN
- Basic static load rating: 415 kN
INA NNTR90X220X100-2ZL Yoke type track rollers
Nodes bearings have INA NNTR90X220X100-2ZL bearings in stock, Yoke type track rollers, NNTR90X220X100-2ZL bearings dimensions: 90mm x 220mm x 100mm, Cr: 500000N, C0r: 750000N, Full complement roller set, axial guidance, central rib, sealing shields wi
- Brand: INA
- Inside Diameter: 90 mm
- Outside Diameter: 220 mm
- Width: 100 mm
- Basic dynamic load rating: 500 kN
- Basic static load rating: 500 kN
INA NNTR100X240X105-2ZL Yoke type track rollers
Nodes bearings have INA NNTR100X240X105-2ZL bearings in stock, Yoke type track rollers, NNTR100X240X105-2ZL bearings dimensions: 100mm x 240mm x 105mm, Cr: 560000N, C0r: 870000N, Full complement roller set, axial guidance, central rib, sealing shields
- Brand: INA
- Inside Diameter: 100 mm
- Outside Diameter: 240 mm
- Width: 105 mm
- Basic dynamic load rating: 560 kN
- Basic static load rating: 560 kN
INA NNTR110X260X115-2ZL Yoke type track rollers
Nodes bearings have INA NNTR110X260X115-2ZL bearings in stock, Yoke type track rollers, NNTR110X260X115-2ZL bearings dimensions: 110mm x 260mm x 115mm, Cr: 670000N, C0r: 1050000N, Full complement roller set, axial guidance, central rib, sealing shield
- Brand: INA
- Inside Diameter: 110 mm
- Outside Diameter: 260 mm
- Width: 115 mm
- Basic dynamic load rating: 670 kN
- Basic static load rating: 670 kN
INA NNTR120X290X135-2ZL Yoke type track rollers
Nodes bearings have INA NNTR120X290X135-2ZL bearings in stock, Yoke type track rollers, NNTR120X290X135-2ZL bearings dimensions: 120mm x 290mm x 135mm, Cr: 880000N, C0r: 1400000N, Full complement roller set, axial guidance, central rib, sealing shield
- Brand: INA
- Inside Diameter: 120 mm
- Outside Diameter: 290 mm
- Width: 135 mm
- Basic dynamic load rating: 880 kN
- Basic static load rating: 880 kN
INA NNTR130X310X146-2ZL Yoke type track rollers
Nodes bearings have INA NNTR130X310X146-2ZL bearings in stock, Yoke type track rollers, NNTR130X310X146-2ZL bearings dimensions: 130mm x 310mm x 146mm, Cr: 1010000N, C0r: 1630000N, Full complement roller set, axial guidance, central rib, sealing shiel
- Brand: INA
- Inside Diameter: 130 mm
- Outside Diameter: 310 mm
- Width: 146 mm
- Basic dynamic load rating: 1010 kN
- Basic static load rating: 1010 kN
INA NATV5-PP Yoke type track rollers
Nodes bearings have INA NATV5-PP bearings in stock, Yoke type track rollers, full complement needle roller set, with axial guidance, axial plain washers on both sides, NATV5-PP bearings dimensions: 5mm x 16mm x 12mm, Cr: 4900N, C0r: 6600N.
- Brand: INA
- Inside Diameter: 5 mm
- Outside Diameter: 16 mm
- Width: 12 mm
- Basic dynamic load rating: 4.9 kN
- Basic static load rating: 4.9 kN
INA NATV12-PP Yoke type track rollers
Nodes bearings have INA NATV12-PP bearings in stock, Yoke type track rollers, full complement needle roller set, with axial guidance, axial plain washers on both sides, NATV12-PP bearings dimensions: 12mm x 32mm x 15mm, Cr: 9700N, C0r: 15700N.
- Brand: INA
- Inside Diameter: 12 mm
- Outside Diameter: 32 mm
- Width: 15 mm
- Basic dynamic load rating: 9.7 kN
- Basic static load rating: 9.7 kN
INA NATV20-PP Yoke type track rollers
Nodes bearings have INA NATV20-PP bearings in stock, Yoke type track rollers, full complement needle roller set, with axial guidance, axial plain washers on both sides, NATV20-PP bearings dimensions: 20mm x 47mm x 25mm, Cr: 20300N, C0r: 42000N.
- Brand: INA
- Inside Diameter: 20 mm
- Outside Diameter: 47 mm
- Width: 25 mm
- Basic dynamic load rating: 20.3 kN
- Basic static load rating: 20.3 kN
INA NATV30-PP Yoke type track rollers
Nodes bearings have INA NATV30-PP bearings in stock, Yoke type track rollers, full complement needle roller set, with axial guidance, axial plain washers on both sides, NATV30-PP bearings dimensions: 30mm x 62mm x 29mm, Cr: 30000N, C0r: 62000N.
- Brand: INA
- Inside Diameter: 30 mm
- Outside Diameter: 62 mm
- Width: 29 mm
- Basic dynamic load rating: 30 kN
- Basic static load rating: 30 kN
INA NATV35-PP Yoke type track rollers
Nodes bearings have INA NATV35-PP bearings in stock, Yoke type track rollers, full complement needle roller set, with axial guidance, axial plain washers on both sides, NATV35-PP bearings dimensions: 35mm x 72mm x 29mm, Cr: 32500N, C0r: 71000N.
- Brand: INA
- Inside Diameter: 35 mm
- Outside Diameter: 72 mm
- Width: 29 mm
- Basic dynamic load rating: 32.5 kN
- Basic static load rating: 32.5 kN
INA NATV40-PP Yoke type track rollers
Nodes bearings have INA NATV40-PP bearings in stock, Yoke type track rollers, full complement needle roller set, with axial guidance, axial plain washers on both sides, NATV40-PP bearings dimensions: 40mm x 80mm x 32mm, Cr: 40000N, C0r: 88000N.
- Brand: INA
- Inside Diameter: 40 mm
- Outside Diameter: 80 mm
- Width: 32 mm
- Basic dynamic load rating: 40 kN
- Basic static load rating: 40 kN
INA PWTR15-2RS-XL Yoke type track rollers
Nodes bearings have INA PWTR15-2RS-XL bearings in stock, Yoke type track rollers, PWTR15-2RS-XL bearings dimensions: 15mm x 35mm x 19mm, Cr: 12600N, C0r: 14600N, full complement cylindrical roller set, with axial guidance, lip seals on both sides.
- Brand: INA
- Inside Diameter: 15 mm
- Outside Diameter: 35 mm
- Width: 19 mm
- Basic dynamic load rating: 12.6 kN
- Basic static load rating: 12.6 kN
INA PWTR1542-2RS-XL Yoke type track rollers
Nodes bearings have INA PWTR1542-2RS-XL bearings in stock, Yoke type track rollers, PWTR1542-2RS-XL bearings dimensions: 15mm x 42mm x 19mm, Cr: 14700N, C0r: 16200N, full complement cylindrical roller set, with axial guidance, lip seals on both sides.
- Brand: INA
- Inside Diameter: 15 mm
- Outside Diameter: 42 mm
- Width: 19 mm
- Basic dynamic load rating: 14.7 kN
- Basic static load rating: 14.7 kN
INA PWTR1747-2RS-XL Yoke type track rollers
Nodes bearings have INA PWTR1747-2RS-XL bearings in stock, Yoke type track rollers, PWTR1747-2RS-XL bearings dimensions: 17mm x 47mm x 21mm, Cr: 15900N, C0r: 18400N, full complement cylindrical roller set, with axial guidance, lip seals on both sides.
- Brand: INA
- Inside Diameter: 17 mm
- Outside Diameter: 47 mm
- Width: 21 mm
- Basic dynamic load rating: 15.9 kN
- Basic static load rating: 15.9 kN
INA PWTR2052-2RS-XL Yoke type track rollers
Nodes bearings have INA PWTR2052-2RS-XL bearings in stock, Yoke type track rollers, PWTR2052-2RS-XL bearings dimensions: 20mm x 52mm x 25mm, Cr: 27000N, C0r: 35000N, full complement cylindrical roller set, with axial guidance, lip seals on both sides.
- Brand: INA
- Inside Diameter: 20 mm
- Outside Diameter: 52 mm
- Width: 25 mm
- Basic dynamic load rating: 27 kN
- Basic static load rating: 27 kN
INA PWTR2562-2RS-XL Yoke type track rollers
Nodes bearings have INA PWTR2562-2RS-XL bearings in stock, Yoke type track rollers, PWTR2562-2RS-XL bearings dimensions: 25mm x 62mm x 25mm, Cr: 30000N, C0r: 42500N, full complement cylindrical roller set, with axial guidance, lip seals on both sides.
- Brand: INA
- Inside Diameter: 25 mm
- Outside Diameter: 62 mm
- Width: 25 mm
- Basic dynamic load rating: 30 kN
- Basic static load rating: 30 kN
INA PWTR3072-2RS-XL Yoke type track rollers
Nodes bearings have INA PWTR3072-2RS-XL bearings in stock, Yoke type track rollers, PWTR3072-2RS-XL bearings dimensions: 30mm x 72mm x 29mm, Cr: 41000N, C0r: 56000N, full complement cylindrical roller set, with axial guidance, lip seals on both sides.
- Brand: INA
- Inside Diameter: 30 mm
- Outside Diameter: 72 mm
- Width: 29 mm
- Basic dynamic load rating: 41 kN
- Basic static load rating: 41 kN
INA PWTR35-2RS-XL Yoke type track rollers
Nodes bearings have INA PWTR35-2RS-XL bearings in stock, Yoke type track rollers, PWTR35-2RS-XL bearings dimensions: 35mm x 72mm x 29mm, Cr: 38500N, C0r: 54000N, full complement cylindrical roller set, with axial guidance, lip seals on both sides.
- Brand: INA
- Inside Diameter: 35 mm
- Outside Diameter: 72 mm
- Width: 29 mm
- Basic dynamic load rating: 38.5 kN
- Basic static load rating: 38.5 kN
INA PWTR3580-2RS-XL Yoke type track rollers
Nodes bearings have INA PWTR3580-2RS-XL bearings in stock, Yoke type track rollers, PWTR3580-2RS-XL bearings dimensions: 35mm x 80mm x 29mm, Cr: 43500N, C0r: 63000N, full complement cylindrical roller set, with axial guidance, lip seals on both sides.
- Brand: INA
- Inside Diameter: 35 mm
- Outside Diameter: 80 mm
- Width: 29 mm
- Basic dynamic load rating: 43.5 kN
- Basic static load rating: 43.5 kN
INA PWTR40-2RS-XL Yoke type track rollers
Nodes bearings have INA PWTR40-2RS-XL bearings in stock, Yoke type track rollers, PWTR40-2RS-XL bearings dimensions: 40mm x 80mm x 32mm, Cr: 45000N, C0r: 61000N, full complement cylindrical roller set, with axial guidance, lip seals on both sides.
- Brand: INA
- Inside Diameter: 40 mm
- Outside Diameter: 80 mm
- Width: 32 mm
- Basic dynamic load rating: 45 kN
- Basic static load rating: 45 kN
INA PWTR4090-2RS-XL Yoke type track rollers
Nodes bearings have INA PWTR4090-2RS-XL bearings in stock, Yoke type track rollers, PWTR4090-2RS-XL bearings dimensions: 40mm x 90mm x 32mm, Cr: 52000N, C0r: 75000N, full complement cylindrical roller set, with axial guidance, lip seals on both sides.
- Brand: INA
- Inside Diameter: 40 mm
- Outside Diameter: 90 mm
- Width: 32 mm
- Basic dynamic load rating: 52 kN
- Basic static load rating: 52 kN
INA PWTR45-2RS-XL Yoke type track rollers
Nodes bearings have INA PWTR45-2RS-XL bearings in stock, Yoke type track rollers, PWTR45-2RS-XL bearings dimensions: 45mm x 85mm x 32mm, Cr: 45500N, C0r: 63000N, full complement cylindrical roller set, with axial guidance, lip seals on both sides.
- Brand: INA
- Inside Diameter: 45 mm
- Outside Diameter: 85 mm
- Width: 32 mm
- Basic dynamic load rating: 45.5 kN
- Basic static load rating: 45.5 kN
INA PWTR45100-2RS-XL Yoke type track rollers
Nodes bearings have INA PWTR45100-2RS-XL bearings in stock, Yoke type track rollers, PWTR45100-2RS-XL bearings dimensions: 45mm x 100mm x 32mm, Cr: 56000N, C0r: 85000N, full complement cylindrical roller set, with axial guidance, lip seals on both sid
- Brand: INA
- Inside Diameter: 45 mm
- Outside Diameter: 100 mm
- Width: 32 mm
- Basic dynamic load rating: 56 kN
- Basic static load rating: 56 kN
INA PWTR50-2RS-XL Yoke type track rollers
Nodes bearings have INA PWTR50-2RS-XL bearings in stock, Yoke type track rollers, PWTR50-2RS-XL bearings dimensions: 50mm x 90mm x 32mm, Cr: 46000N, C0r: 66000N, full complement cylindrical roller set, with axial guidance, lip seals on both sides.
- Brand: INA
- Inside Diameter: 50 mm
- Outside Diameter: 90 mm
- Width: 32 mm
- Basic dynamic load rating: 46 kN
- Basic static load rating: 46 kN
INA PWTR50110-2RS-XL Yoke type track rollers
Nodes bearings have INA PWTR50110-2RS-XL bearings in stock, Yoke type track rollers, PWTR50110-2RS-XL bearings dimensions: 50mm x 110mm x 32mm, Cr: 59000N, C0r: 94000N, full complement cylindrical roller set, with axial guidance, lip seals on both sid
- Brand: INA
- Inside Diameter: 50 mm
- Outside Diameter: 110 mm
- Width: 32 mm
- Basic dynamic load rating: 59 kN
- Basic static load rating: 59 kN
INA NUTR1542 Yoke type track rollers
Nodes bearings have INA NUTR1542 bearings in stock, Yoke type track rollers, NUTR1542 bearings dimensions: 15mm x 42mm x 19mm, Cr: 18300N, C0r: 24300N, full complement cylindrical roller set, with axial guidance, labyrinth seals on both sides.
- Brand: INA
- Inside Diameter: 15 mm
- Outside Diameter: 42 mm
- Width: 19 mm
- Basic dynamic load rating: 18.3 kN
- Basic static load rating: 18.3 kN
INA NUTR3072 Yoke type track rollers
Nodes bearings have INA NUTR3072 bearings in stock, Yoke type track rollers, NUTR3072 bearings dimensions: 30mm x 72mm x 29mm, Cr: 48000N, C0r: 70000N, full complement cylindrical roller set, with axial guidance, labyrinth seals on both sides.
- Brand: INA
- Inside Diameter: 30 mm
- Outside Diameter: 72 mm
- Width: 29 mm
- Basic dynamic load rating: 48 kN
- Basic static load rating: 48 kN
INA NUTR4090 Yoke type track rollers
Nodes bearings have INA NUTR4090 bearings in stock, Yoke type track rollers, NUTR4090 bearings dimensions: 40mm x 90mm x 32mm, Cr: 66000N, C0r: 101000N, full complement cylindrical roller set, with axial guidance, labyrinth seals on both sides.
- Brand: INA
- Inside Diameter: 40 mm
- Outside Diameter: 90 mm
- Width: 32 mm
- Basic dynamic load rating: 66 kN
- Basic static load rating: 66 kN
INA NUTR45 Yoke type track rollers
Nodes bearings have INA NUTR45 bearings in stock, Yoke type track rollers, NUTR45 bearings dimensions: 45mm x 85mm x 32mm, Cr: 56000N, C0r: 83000N, full complement cylindrical roller set, with axial guidance, labyrinth seals on both sides.
- Brand: INA
- Inside Diameter: 45 mm
- Outside Diameter: 85 mm
- Width: 32 mm
- Basic dynamic load rating: 56 kN
- Basic static load rating: 56 kN
INA NUTR45100 Yoke type track rollers
Nodes bearings have INA NUTR45100 bearings in stock, Yoke type track rollers, NUTR45100 bearings dimensions: 45mm x 100mm x 32mm, Cr: 72000N, C0r: 115000N, full complement cylindrical roller set, with axial guidance, labyrinth seals on both sides.
- Brand: INA
- Inside Diameter: 45 mm
- Outside Diameter: 100 mm
- Width: 32 mm
- Basic dynamic load rating: 72 kN
- Basic static load rating: 72 kN
INA NUTR50 Yoke type track rollers
Nodes bearings have INA NUTR50 bearings in stock, Yoke type track rollers, NUTR50 bearings dimensions: 50mm x 90mm x 32mm, Cr: 56000N, C0r: 86000N, full complement cylindrical roller set, with axial guidance, labyrinth seals on both sides.
- Brand: INA
- Inside Diameter: 50 mm
- Outside Diameter: 90 mm
- Width: 32 mm
- Basic dynamic load rating: 56 kN
- Basic static load rating: 56 kN
INA RNA22/6-2RSR Yoke type track rollers
Nodes bearings have INA RNA22/6-2RSR bearings in stock, Yoke type track rollers, without axial guidance, lip seals on both sides, RNA22/6-2RSR bearings dimensions: 10mm x 19mm x 11.8mm, Cr: 3900N, C0r: 3700N.
- Brand: INA
- Inside Diameter: 10 mm
- Outside Diameter: 19 mm
- Width: 11.8 mm
- Basic dynamic load rating: 3.9 kN
- Basic static load rating: 3.9 kN
INA RNA2200-2RSR Yoke type track rollers
Nodes bearings have INA RNA2200-2RSR bearings in stock, Yoke type track rollers, without axial guidance, lip seals on both sides, RNA2200-2RSR bearings dimensions: 14mm x 30mm x 13.8mm, Cr: 7000N, C0r: 6900N.
- Brand: INA
- Inside Diameter: 14 mm
- Outside Diameter: 30 mm
- Width: 13.8 mm
- Basic dynamic load rating: 7 kN
- Basic static load rating: 7 kN