As INA bearings distributor, Nodes have INA track roller bearings in stock. INA track rollers are self-retaining, single or double row units with particularly thick-walled outer rings. These INA bearings can support axial forces in both directions as well as high radial forces. Track rollers bearing outer rings have a crowned or cylindrical outside surface. Designs with a crowned outside surface are used where there is misalignment in relation to the raceway and edge stresses must be avoided. The track rollers are available with an inner ring, with a stud and with a plastic tyre on the outer ring.
INA NUTR15 Yoke type track rollers
Nodes bearings have INA NUTR15 bearings in stock, Yoke type track rollers, NUTR15 bearings dimensions: 15mm x 35mm x 19mm, Cr: 15300N, C0r: 18700N, full complement cylindrical roller set, with axial guidance, labyrinth seals on both sides.
- Brand: INA
- Inside Diameter: 15 mm
- Outside Diameter: 35 mm
- Width: 19 mm
- Basic dynamic load rating: 15.3 kN
- Basic static load rating: 15.3 kN
INA NUTR17 Yoke type track rollers
Nodes bearings have INA NUTR17 bearings in stock, Yoke type track rollers, NUTR17 bearings dimensions: 17mm x 40mm x 21mm, Cr: 18700N, C0r: 24900N, full complement cylindrical roller set, with axial guidance, labyrinth seals on both sides.
- Brand: INA
- Inside Diameter: 17 mm
- Outside Diameter: 40 mm
- Width: 21 mm
- Basic dynamic load rating: 18.7 kN
- Basic static load rating: 18.7 kN
INA NUTR1747 Yoke type track rollers
Nodes bearings have INA NUTR1747 bearings in stock, Yoke type track rollers, NUTR1747 bearings dimensions: 17mm x 47mm x 21mm, Cr: 21600N, C0r: 30500N, full complement cylindrical roller set, with axial guidance, labyrinth seals on both sides.
- Brand: INA
- Inside Diameter: 17 mm
- Outside Diameter: 47 mm
- Width: 21 mm
- Basic dynamic load rating: 21.6 kN
- Basic static load rating: 21.6 kN
INA NUTR20 Yoke type track rollers
Nodes bearings have INA NUTR20 bearings in stock, Yoke type track rollers, NUTR20 bearings dimensions: 20mm x 47mm x 25mm, Cr: 28500N, C0r: 37500N, full complement cylindrical roller set, with axial guidance, labyrinth seals on both sides.
- Brand: INA
- Inside Diameter: 20 mm
- Outside Diameter: 47 mm
- Width: 25 mm
- Basic dynamic load rating: 28.5 kN
- Basic static load rating: 28.5 kN
INA NUTR25 Yoke type track rollers
Nodes bearings have INA NUTR25 bearings in stock, Yoke type track rollers, NUTR25 bearings dimensions: 25mm x 52mm x 25mm, Cr: 29000N, C0r: 40500N, full complement cylindrical roller set, with axial guidance, labyrinth seals on both sides.
- Brand: INA
- Inside Diameter: 25 mm
- Outside Diameter: 52 mm
- Width: 25 mm
- Basic dynamic load rating: 29 kN
- Basic static load rating: 29 kN
INA NUTR30 Yoke type track rollers
Nodes bearings have INA NUTR30 bearings in stock, Yoke type track rollers, NUTR30 bearings dimensions: 30mm x 62mm x 29mm, Cr: 40000N, C0r: 55000N, full complement cylindrical roller set, with axial guidance, labyrinth seals on both sides.
- Brand: INA
- Inside Diameter: 30 mm
- Outside Diameter: 62 mm
- Width: 29 mm
- Basic dynamic load rating: 40 kN
- Basic static load rating: 40 kN
INA NUTR35 Yoke type track rollers
Nodes bearings have INA NUTR35 bearings in stock, Yoke type track rollers, NUTR35 bearings dimensions: 35mm x 72mm x 29mm, Cr: 45000N, C0r: 65000N, full complement cylindrical roller set, with axial guidance, labyrinth seals on both sides.
- Brand: INA
- Inside Diameter: 35 mm
- Outside Diameter: 72 mm
- Width: 29 mm
- Basic dynamic load rating: 45 kN
- Basic static load rating: 45 kN
INA NUTR3580 Yoke type track rollers
Nodes bearings have INA NUTR3580 bearings in stock, Yoke type track rollers, NUTR3580 bearings dimensions: 35mm x 80mm x 29mm, Cr: 51000N, C0r: 78000N, full complement cylindrical roller set, with axial guidance, labyrinth seals on both sides.
- Brand: INA
- Inside Diameter: 35 mm
- Outside Diameter: 80 mm
- Width: 29 mm
- Basic dynamic load rating: 51 kN
- Basic static load rating: 51 kN
INA NUTR40 Yoke type track rollers
Nodes bearings have INA NUTR40 bearings in stock, Yoke type track rollers, NUTR40 bearings dimensions: 40mm x 80mm x 32mm, Cr: 56000N, C0r: 80000N, full complement cylindrical roller set, with axial guidance, labyrinth seals on both sides.
- Brand: INA
- Inside Diameter: 40 mm
- Outside Diameter: 80 mm
- Width: 32 mm
- Basic dynamic load rating: 56 kN
- Basic static load rating: 56 kN
INA NUTR50110 Yoke type track rollers
Nodes bearings have INA NUTR50110 bearings in stock, Yoke type track rollers, NUTR50110 bearings dimensions: 50mm x 110mm x 32mm, Cr: 76000N, C0r: 128000N, full complement cylindrical roller set, with axial guidance, labyrinth seals on both sides.
- Brand: INA
- Inside Diameter: 50 mm
- Outside Diameter: 110 mm
- Width: 32 mm
- Basic dynamic load rating: 76 kN
- Basic static load rating: 76 kN
INA RNA22/8-2RSR Yoke type track rollers
Nodes bearings have INA RNA22/8-2RSR bearings in stock, Yoke type track rollers, without axial guidance, lip seals on both sides, RNA22/8-2RSR bearings dimensions: 12mm x 24mm x 11.8mm, Cr: 4800N, C0r: 4300N.
- Brand: INA
- Inside Diameter: 12 mm
- Outside Diameter: 24 mm
- Width: 11.8 mm
- Basic dynamic load rating: 4.8 kN
- Basic static load rating: 4.8 kN
INA RSTO17 Yoke type track rollers
Nodes bearings have INA RSTO17 bearings in stock, Yoke type track rollers, without axial guidance, outer ring without ribs, RSTO17 bearings dimensions: 22mm x 40mm x 15.8mm, Cr: 14200N, C0r: 17900N.
- Brand: INA
- Inside Diameter: 22 mm
- Outside Diameter: 40 mm
- Width: 15.8 mm
- Basic dynamic load rating: 14.2 kN
- Basic static load rating: 14.2 kN
INA STO10 Yoke type track rollers
Nodes bearings have INA STO10 bearings in stock, Yoke type track rollers, without axial guidance, outer ring without ribs, STO10 bearings dimensions: 10mm x 30mm x 12mm, Cr: 8400N, C0r: 9300N.
- Brand: INA
- Inside Diameter: 10 mm
- Outside Diameter: 30 mm
- Width: 12 mm
- Basic dynamic load rating: 8.4 kN
- Basic static load rating: 8.4 kN
INA STO12 Yoke type track rollers
Nodes bearings have INA STO12 bearings in stock, Yoke type track rollers, without axial guidance, outer ring without ribs, STO12 bearings dimensions: 12mm x 32mm x 12mm, Cr: 9000N, C0r: 10300N.
- Brand: INA
- Inside Diameter: 12 mm
- Outside Diameter: 32 mm
- Width: 12 mm
- Basic dynamic load rating: 9 kN
- Basic static load rating: 9 kN
INA STO15 Yoke type track rollers
Nodes bearings have INA STO15 bearings in stock, Yoke type track rollers, without axial guidance, outer ring without ribs, STO15 bearings dimensions: 15mm x 35mm x 12mm, Cr: 9100N, C0r: 10900N.
- Brand: INA
- Inside Diameter: 15 mm
- Outside Diameter: 35 mm
- Width: 12 mm
- Basic dynamic load rating: 9.1 kN
- Basic static load rating: 9.1 kN
INA STO35 Yoke type track rollers
Nodes bearings have INA STO35 bearings in stock, Yoke type track rollers, without axial guidance, outer ring without ribs, STO35 bearings dimensions: 35mm x 72mm x 20mm, Cr: 25000N, C0r: 40500N.
- Brand: INA
- Inside Diameter: 35 mm
- Outside Diameter: 72 mm
- Width: 20 mm
- Basic dynamic load rating: 25 kN
- Basic static load rating: 25 kN
INA LR200-2RS track rollers
INA LR200-2RS track rollers, Brand: INA, sealed on both sides, Dimensions: 10mm x 32mm x 9mm, Crw: 5300N, C0rw: 2400N.
- Brand: INA
- Inside Diameter: 10 mm
- Outside Diameter: 32 mm
- Width: 9 mm
- Basic dynamic load rating: 5.3 kN
- Basic static load rating: 5.3 kN
INA LR201-2RSR track rollers
INA LR201-2RSR track rollers, Brand: INA, sealed on both sides, Dimensions: 12mm x 35mm x 10mm, Crw: 6000N, C0rw: 2750N.
- Brand: INA
- Inside Diameter: 12 mm
- Outside Diameter: 35 mm
- Width: 10 mm
- Basic dynamic load rating: 6 kN
- Basic static load rating: 6 kN
INA LR202-2RSR track rollers
INA LR202-2RSR track rollers, Brand: INA, sealed on both sides, Dimensions: 15mm x 40mm x 11mm, Crw: 7000N, C0rw: 3350N.
- Brand: INA
- Inside Diameter: 15 mm
- Outside Diameter: 40 mm
- Width: 11 mm
- Basic dynamic load rating: 7 kN
- Basic static load rating: 7 kN
INA LR203-2RSR track rollers
INA LR203-2RSR track rollers, Brand: INA, sealed on both sides, Dimensions: 17mm x 47mm x 12mm, Crw: 8900N, C0rw: 4450N.
- Brand: INA
- Inside Diameter: 17 mm
- Outside Diameter: 47 mm
- Width: 12 mm
- Basic dynamic load rating: 8.9 kN
- Basic static load rating: 8.9 kN
INA LR204-2RSR track rollers
INA LR204-2RSR track rollers, Brand: INA, sealed on both sides, Dimensions: 20mm x 52mm x 14mm, Crw: 11300N, C0rw: 5700N.
- Brand: INA
- Inside Diameter: 20 mm
- Outside Diameter: 52 mm
- Width: 14 mm
- Basic dynamic load rating: 11.3 kN
- Basic static load rating: 11.3 kN
INA LR205-2RSR track rollers
INA LR205-2RSR track rollers, Brand: INA, sealed on both sides, Dimensions: 25mm x 62mm x 15mm, Crw: 13300N, C0rw: 7100N.
- Brand: INA
- Inside Diameter: 25 mm
- Outside Diameter: 62 mm
- Width: 15 mm
- Basic dynamic load rating: 13.3 kN
- Basic static load rating: 13.3 kN
INA LR5201-2HRS-TVH-XL track rollers
INA LR5201-2HRS-TVH-XL track rollers, Brand: INA, double row, sealed on both sides, Dimensions: 12mm x 35mm x 15.9mm, Crw: 8800N, C0rw: 6000N.
- Brand: INA
- Inside Diameter: 12 mm
- Outside Diameter: 35 mm
- Width: 15.9 mm
- Basic dynamic load rating: 8.8 kN
- Basic static load rating: 8.8 kN
INA LR5201-2Z-TVH-XL track rollers
INA LR5201-2Z-TVH-XL track rollers, Brand: INA, double row, sealed on both sides, Dimensions: 12mm x 35mm x 15.9mm, Crw: 8800N, C0rw: 6000N.
- Brand: INA
- Inside Diameter: 12 mm
- Outside Diameter: 35 mm
- Width: 15.9 mm
- Basic dynamic load rating: 8.8 kN
- Basic static load rating: 8.8 kN
INA LR5202-2HRS-TVH-XL track rollers
INA LR5202-2HRS-TVH-XL track rollers, Brand: INA, double row, sealed on both sides, Dimensions: 15mm x 40mm x 15.9mm, Crw: 10800N, C0rw: 7500N.
- Brand: INA
- Inside Diameter: 15 mm
- Outside Diameter: 40 mm
- Width: 15.9 mm
- Basic dynamic load rating: 10.8 kN
- Basic static load rating: 10.8 kN
INA LR5203-2Z-TVH-XL track rollers
INA LR5203-2Z-TVH-XL track rollers, Brand: INA, double row, sealed on both sides, Dimensions: 17mm x 47mm x 17.5mm, Crw: 13700N, C0rw: 9800N.
- Brand: INA
- Inside Diameter: 17 mm
- Outside Diameter: 47 mm
- Width: 17.5 mm
- Basic dynamic load rating: 13.7 kN
- Basic static load rating: 13.7 kN
INA LR5204-2HRS-TVH-XL track rollers
INA LR5204-2HRS-TVH-XL track rollers, Brand: INA, double row, sealed on both sides, Dimensions: 20mm x 52mm x 20.6mm, Crw: 16900N, C0rw: 12300N.
- Brand: INA
- Inside Diameter: 20 mm
- Outside Diameter: 52 mm
- Width: 20.6 mm
- Basic dynamic load rating: 16.9 kN
- Basic static load rating: 16.9 kN
INA LR5206-2Z-TVH-XL track rollers
INA LR5206-2Z-TVH-XL track rollers, Brand: INA, double row, sealed on both sides, Dimensions: 30mm x 72mm x 23.8mm, Crw: 26500N, C0rw: 21400N.
- Brand: INA
- Inside Diameter: 30 mm
- Outside Diameter: 72 mm
- Width: 23.8 mm
- Basic dynamic load rating: 26.5 kN
- Basic static load rating: 26.5 kN
INA LR5005-2RS track rollers
INA LR5005-2RS track rollers, Brand: INA, double row, sealed on both sides, Dimensions: 25mm x 52mm x 16mm, Crw: 11800N, C0rw: 8200N.
- Brand: INA
- Inside Diameter: 25 mm
- Outside Diameter: 52 mm
- Width: 16 mm
- Basic dynamic load rating: 11.8 kN
- Basic static load rating: 11.8 kN
INA LR5306-2HRS-TVH-XL track rollers
INA LR5306-2HRS-TVH-XL track rollers, Brand: INA, double row, sealed on both sides, Dimensions: 30mm x 80mm x 30.2mm, Crw: 36000N, C0rw: 28500N.
- Brand: INA
- Inside Diameter: 30 mm
- Outside Diameter: 80 mm
- Width: 30.2 mm
- Basic dynamic load rating: 36 kN
- Basic static load rating: 36 kN
INA LFR50/5-6-2Z track rollers
INA LFR50/5-6-2Z bearing, Brand: INA, locating bearing track rollers, double row, gap seals on both sides, Dimensions: 5mm x 17mm x 8mm, Crw: 1630N, C0rw: 900N.
- Brand: INA
- Inside Diameter: 5 mm
- Outside Diameter: 17 mm
- Width: 8 mm
- Basic dynamic load rating: 1.62 kN
- Basic static load rating: 1.62 kN
INA LFR5302-10-2Z track rollers
INA LFR5302-10-2Z bearing, Brand: INA, locating bearing track rollers, double row, gap seals on both sides, Dimensions: 15mm x 47mm x 19mm, Crw: 14500N, C0rw: 9100N.
- Brand: INA
- Inside Diameter: 15 mm
- Outside Diameter: 47 mm
- Width: 19 mm
- Basic dynamic load rating: 14.5 kN
- Basic static load rating: 14.5 kN
INA LFR5204-16-2Z track rollers
INA LFR5204-16-2Z bearing, Brand: INA, locating bearing track rollers, double row, gap seals on both sides, Dimensions: 20mm x 52mm x 22.6mm, Crw: 15300N, C0rw: 10100N.
- Brand: INA
- Inside Diameter: 20 mm
- Outside Diameter: 52 mm
- Width: 22.6 mm
- Basic dynamic load rating: 15.3 kN
- Basic static load rating: 15.3 kN
INA LFR5206-20-2Z track rollers
INA LFR5206-20-2Z bearing, Brand: INA, locating bearing track rollers, double row, gap seals on both sides, Dimensions: 25mm x 72mm x 25.8mm, Crw: 23100N, C0rw: 16400N.
- Brand: INA
- Inside Diameter: 25 mm
- Outside Diameter: 72 mm
- Width: 25.8 mm
- Basic dynamic load rating: 23.1 kN
- Basic static load rating: 23.1 kN
INA LFR5207-30-2Z track rollers
INA LFR5207-30-2Z bearing, Brand: INA, locating bearing track rollers, double row, gap seals on both sides, Dimensions: 30mm x 80mm x 29mm, Crw: 28500N, C0rw: 20800N.
- Brand: INA
- Inside Diameter: 30 mm
- Outside Diameter: 80 mm
- Width: 29 mm
- Basic dynamic load rating: 28.5 kN
- Basic static load rating: 28.5 kN
INA NATR30-PP Yoke type track rollers
Nodes bearings have INA NATR30-PP bearings in stock, Yoke type track rollers, with axial guidance, axial plain washers on both sides, NATR30-PP bearings dimensions: 30mm x 62mm x 29mm, Cr: 23200N, C0r: 39000N.
- Brand: INA
- Inside Diameter: 30 mm
- Outside Diameter: 62 mm
- Width: 29 mm
- Basic dynamic load rating: 23.2 kN
- Basic static load rating: 23.2 kN
INA NATR40-PP Yoke type track rollers
Nodes bearings have INA NATR40-PP bearings in stock, Yoke type track rollers, with axial guidance, axial plain washers on both sides, NATR40-PP bearings dimensions: 40mm x 80mm x 32mm, Cr: 32000N, C0r: 58000N.
- Brand: INA
- Inside Diameter: 40 mm
- Outside Diameter: 80 mm
- Width: 32 mm
- Basic dynamic load rating: 32 kN
- Basic static load rating: 32 kN
INA NATR50-PP Yoke type track rollers
Nodes bearings have INA NATR50-PP bearings in stock, Yoke type track rollers, with axial guidance, axial plain washers on both sides, NATR50-PP bearings dimensions: 50mm x 90mm x 32mm, Cr: 31000N, C0r: 59000N.
- Brand: INA
- Inside Diameter: 50 mm
- Outside Diameter: 90 mm
- Width: 32 mm
- Basic dynamic load rating: 31 kN
- Basic static load rating: 31 kN