As INA bearings distributor, Nodes have INA track roller bearings in stock. INA track rollers are self-retaining, single or double row units with particularly thick-walled outer rings. These INA bearings can support axial forces in both directions as well as high radial forces. Track rollers bearing outer rings have a crowned or cylindrical outside surface. Designs with a crowned outside surface are used where there is misalignment in relation to the raceway and edge stresses must be avoided. The track rollers are available with an inner ring, with a stud and with a plastic tyre on the outer ring.
INA RNA2201-2RSR Yoke type track rollers
Nodes bearings have INA RNA2201-2RSR bearings in stock, Yoke type track rollers, without axial guidance, lip seals on both sides, RNA2201-2RSR bearings dimensions: 16mm x 32mm x 13.8mm, Cr: 7500N, C0r: 8300N.
- Brand: INA
- Inside Diameter: 16 mm
- Outside Diameter: 32 mm
- Width: 13.8 mm
- Basic dynamic load rating: 7.5 kN
- Basic static load rating: 7.5 kN
INA RNA2202-2RSR Yoke type track rollers
Nodes bearings have INA RNA2202-2RSR bearings in stock, Yoke type track rollers, without axial guidance, lip seals on both sides, RNA2202-2RSR bearings dimensions: 20mm x 35mm x 13.8mm, Cr: 7600N, C0r: 9800N.
- Brand: INA
- Inside Diameter: 20 mm
- Outside Diameter: 35 mm
- Width: 13.8 mm
- Basic dynamic load rating: 7.6 kN
- Basic static load rating: 7.6 kN
INA RNA2203-2RSR Yoke type track rollers
Nodes bearings have INA RNA2203-2RSR bearings in stock, Yoke type track rollers, without axial guidance, lip seals on both sides, RNA2203-2RSR bearings dimensions: 22mm x 40mm x 15.8mm, Cr: 9900N, C0r: 14000N.
- Brand: INA
- Inside Diameter: 22 mm
- Outside Diameter: 40 mm
- Width: 15.8 mm
- Basic dynamic load rating: 9.9 kN
- Basic static load rating: 9.9 kN
INA RNA2204-2RSR Yoke type track rollers
Nodes bearings have INA RNA2204-2RSR bearings in stock, Yoke type track rollers, without axial guidance, lip seals on both sides, RNA2204-2RSR bearings dimensions: 25mm x 47mm x 17.8mm, Cr: 14000N, C0r: 19100N.
- Brand: INA
- Inside Diameter: 25 mm
- Outside Diameter: 47 mm
- Width: 17.8 mm
- Basic dynamic load rating: 14 kN
- Basic static load rating: 14 kN
INA RNA2205-2RSR Yoke type track rollers
Nodes bearings have INA RNA2205-2RSR bearings in stock, Yoke type track rollers, without axial guidance, lip seals on both sides, RNA2205-2RSR bearings dimensions: 30mm x 52mm x 17.8mm, Cr: 14400N, C0r: 20800N.
- Brand: INA
- Inside Diameter: 30 mm
- Outside Diameter: 52 mm
- Width: 17.8 mm
- Basic dynamic load rating: 14.4 kN
- Basic static load rating: 14.4 kN
INA RNA2206-2RSR Yoke type track rollers
Nodes bearings have INA RNA2206-2RSR bearings in stock, Yoke type track rollers, without axial guidance, lip seals on both sides, RNA2206-2RSR bearings dimensions: 35mm x 62mm x 19.8mm, Cr: 17100N, C0r: 26000N.
- Brand: INA
- Inside Diameter: 35 mm
- Outside Diameter: 62 mm
- Width: 19.8 mm
- Basic dynamic load rating: 17.1 kN
- Basic static load rating: 17.1 kN
INA RNA2207-2RSR Yoke type track rollers
Nodes bearings have INA RNA2207-2RSR bearings in stock, Yoke type track rollers, without axial guidance, lip seals on both sides, RNA2207-2RSR bearings dimensions: 42mm x 72mm x 22.7mm, Cr: 21500N, C0r: 36000N.
- Brand: INA
- Inside Diameter: 42 mm
- Outside Diameter: 72 mm
- Width: 22.7 mm
- Basic dynamic load rating: 21.5 kN
- Basic static load rating: 21.5 kN
INA RNA2208-2RSR Yoke type track rollers
Nodes bearings have INA RNA2208-2RSR bearings in stock, Yoke type track rollers, without axial guidance, lip seals on both sides, RNA2208-2RSR bearings dimensions: 48mm x 80mm x 22.7mm, Cr: 26000N, C0r: 41000N.
- Brand: INA
- Inside Diameter: 48 mm
- Outside Diameter: 80 mm
- Width: 22.7 mm
- Basic dynamic load rating: 26 kN
- Basic static load rating: 26 kN
INA PWTR15-2RS-RR-XL Yoke type track rollers
Nodes bearings have INA PWTR15-2RS-RR-XL bearings in stock, Yoke type track rollers, PWTR15-2RS-RR-XL bearings dimensions: 15mm x 35mm x 19mm, Cr: 12600N, C0r: 14600N, Full complement cylindrical roller set, with axial guidance, lip seal on both sides
- Brand: INA
- Inside Diameter: 15 mm
- Outside Diameter: 35 mm
- Width: 19 mm
- Basic dynamic load rating: 12.6 kN
- Basic static load rating: 12.6 kN
INA PWTR1542-2RS-RR-XL Yoke type track rollers
Nodes bearings have INA PWTR1542-2RS-RR-XL bearings in stock, Yoke type track rollers, PWTR1542-2RS-RR-XL bearings dimensions: 15mm x 42mm x 19mm, Cr: 14700N, C0r: 16200N, Full complement cylindrical roller set, with axial guidance, lip seal on both s
- Brand: INA
- Inside Diameter: 15 mm
- Outside Diameter: 42 mm
- Width: 19 mm
- Basic dynamic load rating: 14.7 kN
- Basic static load rating: 14.7 kN
INA PWTR17-2RS-RR-XL Yoke type track rollers
Nodes bearings have INA PWTR17-2RS-RR-XL bearings in stock, Yoke type track rollers, PWTR17-2RS-RR-XL bearings dimensions: 17mm x 40mm x 21mm, Cr: 14300N, C0r: 17900N, Full complement cylindrical roller set, with axial guidance, lip seal on both sides
- Brand: INA
- Inside Diameter: 17 mm
- Outside Diameter: 40 mm
- Width: 21 mm
- Basic dynamic load rating: 14.3 kN
- Basic static load rating: 14.3 kN
INA PWTR1747-2RS-RR-XL Yoke type track rollers
Nodes bearings have INA PWTR1747-2RS-RR-XL bearings in stock, Yoke type track rollers, PWTR1747-2RS-RR-XL bearings dimensions: 17mm x 47mm x 21mm, Cr: 15900N, C0r: 18400N, Full complement cylindrical roller set, with axial guidance, lip seal on both s
- Brand: INA
- Inside Diameter: 17 mm
- Outside Diameter: 47 mm
- Width: 21 mm
- Basic dynamic load rating: 15.9 kN
- Basic static load rating: 15.9 kN
INA PWTR20-2RS-RR-XL Yoke type track rollers
Nodes bearings have INA PWTR20-2RS-RR-XL bearings in stock, Yoke type track rollers, PWTR20-2RS-RR-XL bearings dimensions: 20mm x 47mm x 25mm, Cr: 24500N, C0r: 30500N, Full complement cylindrical roller set, with axial guidance, lip seal on both sides
- Brand: INA
- Inside Diameter: 20 mm
- Outside Diameter: 47 mm
- Width: 25 mm
- Basic dynamic load rating: 24.5 kN
- Basic static load rating: 24.5 kN
INA PWTR2052-2RS-RR-XL Yoke type track rollers
Nodes bearings have INA PWTR2052-2RS-RR-XL bearings in stock, Yoke type track rollers, PWTR2052-2RS-RR-XL bearings dimensions: 20mm x 52mm x 25mm, Cr: 27000N, C0r: 35000N, Full complement cylindrical roller set, with axial guidance, lip seal on both s
- Brand: INA
- Inside Diameter: 20 mm
- Outside Diameter: 52 mm
- Width: 25 mm
- Basic dynamic load rating: 27 kN
- Basic static load rating: 27 kN
INA PWTR25-2RS-RR-XL Yoke type track rollers
Nodes bearings have INA PWTR25-2RS-RR-XL bearings in stock, Yoke type track rollers, PWTR25-2RS-RR-XL bearings dimensions: 25mm x 52mm x 25mm, Cr: 25000N, C0r: 33000N, Full complement cylindrical roller set, with axial guidance, lip seal on both sides
- Brand: INA
- Inside Diameter: 25 mm
- Outside Diameter: 52 mm
- Width: 25 mm
- Basic dynamic load rating: 25 kN
- Basic static load rating: 25 kN
INA PWTR2562-2RS-RR-XL Yoke type track rollers
Nodes bearings have INA PWTR2562-2RS-RR-XL bearings in stock, Yoke type track rollers, PWTR2562-2RS-RR-XL bearings dimensions: 25mm x 62mm x 25mm, Cr: 30000N, C0r: 42500N, Full complement cylindrical roller set, with axial guidance, lip seal on both s
- Brand: INA
- Inside Diameter: 25 mm
- Outside Diameter: 62 mm
- Width: 25 mm
- Basic dynamic load rating: 30 kN
- Basic static load rating: 30 kN
INA PWTR30-2RS-RR-XL Yoke type track rollers
Nodes bearings have INA PWTR30-2RS-RR-XL bearings in stock, Yoke type track rollers, PWTR30-2RS-RR-XL bearings dimensions: 30mm x 62mm x 29mm, Cr: 35000N, C0r: 45500N, Full complement cylindrical roller set, with axial guidance, lip seal on both sides
- Brand: INA
- Inside Diameter: 30 mm
- Outside Diameter: 62 mm
- Width: 29 mm
- Basic dynamic load rating: 35 kN
- Basic static load rating: 35 kN
INA PWTR3072-2RS-RR-XL Yoke type track rollers
Nodes bearings have INA PWTR3072-2RS-RR-XL bearings in stock, Yoke type track rollers, PWTR3072-2RS-RR-XL bearings dimensions: 30mm x 72mm x 29mm, Cr: 41000N, C0r: 56000N, Full complement cylindrical roller set, with axial guidance, lip seal on both s
- Brand: INA
- Inside Diameter: 30 mm
- Outside Diameter: 72 mm
- Width: 29 mm
- Basic dynamic load rating: 41 kN
- Basic static load rating: 41 kN
INA PWTR35-2RS-RR-XL Yoke type track rollers
Nodes bearings have INA PWTR35-2RS-RR-XL bearings in stock, Yoke type track rollers, PWTR35-2RS-RR-XL bearings dimensions: 35mm x 72mm x 29mm, Cr: 38500N, C0r: 54000N, Full complement cylindrical roller set, with axial guidance, lip seal on both sides
- Brand: INA
- Inside Diameter: 35 mm
- Outside Diameter: 72 mm
- Width: 29 mm
- Basic dynamic load rating: 38.5 kN
- Basic static load rating: 38.5 kN
INA PWTR3580-2RS-RR-XL Yoke type track rollers
Nodes bearings have INA PWTR3580-2RS-RR-XL bearings in stock, Yoke type track rollers, PWTR3580-2RS-RR-XL bearings dimensions: 35mm x 80mm x 29mm, Cr: 43500N, C0r: 63000N, Full complement cylindrical roller set, with axial guidance, lip seal on both s
- Brand: INA
- Inside Diameter: 35 mm
- Outside Diameter: 80 mm
- Width: 29 mm
- Basic dynamic load rating: 43.5 kN
- Basic static load rating: 43.5 kN
INA PWTR40-2RS-RR-XL Yoke type track rollers
Nodes bearings have INA PWTR40-2RS-RR-XL bearings in stock, Yoke type track rollers, PWTR40-2RS-RR-XL bearings dimensions: 40mm x 80mm x 32mm, Cr: 45000N, C0r: 61000N, Full complement cylindrical roller set, with axial guidance, lip seal on both sides
- Brand: INA
- Inside Diameter: 40 mm
- Outside Diameter: 80 mm
- Width: 32 mm
- Basic dynamic load rating: 45 kN
- Basic static load rating: 45 kN
INA PWTR4090-2RS-RR-XL Yoke type track rollers
Nodes bearings have INA PWTR4090-2RS-RR-XL bearings in stock, Yoke type track rollers, PWTR4090-2RS-RR-XL bearings dimensions: 40mm x 90mm x 32mm, Cr: 52000N, C0r: 75000N, Full complement cylindrical roller set, with axial guidance, lip seal on both s
- Brand: INA
- Inside Diameter: 40 mm
- Outside Diameter: 90 mm
- Width: 32 mm
- Basic dynamic load rating: 52 kN
- Basic static load rating: 52 kN
INA PWTR45-2RS-RR-XL Yoke type track rollers
Nodes bearings have INA PWTR45-2RS-RR-XL bearings in stock, Yoke type track rollers, PWTR45-2RS-RR-XL bearings dimensions: 45mm x 85mm x 32mm, Cr: 45500N, C0r: 63000N, Full complement cylindrical roller set, with axial guidance, lip seal on both sides
- Brand: INA
- Inside Diameter: 45 mm
- Outside Diameter: 85 mm
- Width: 32 mm
- Basic dynamic load rating: 45.5 kN
- Basic static load rating: 45.5 kN
INA RSTO20 Yoke type track rollers
Nodes bearings have INA RSTO20 bearings in stock, Yoke type track rollers, without axial guidance, outer ring without ribs, RSTO20 bearings dimensions: 25mm x 47mm x 15.8mm, Cr: 16100N, C0r: 21700N.
- Brand: INA
- Inside Diameter: 25 mm
- Outside Diameter: 47 mm
- Width: 15.8 mm
- Basic dynamic load rating: 16.1 kN
- Basic static load rating: 16.1 kN
INA RSTO10 Yoke type track rollers
Nodes bearings have INA RSTO10 bearings in stock, Yoke type track rollers, without axial guidance, outer ring without ribs, RSTO10 bearings dimensions: 14mm x 30mm x 11.8mm, Cr: 8400N, C0r: 9300N.
- Brand: INA
- Inside Diameter: 14 mm
- Outside Diameter: 30 mm
- Width: 11.8 mm
- Basic dynamic load rating: 8.4 kN
- Basic static load rating: 8.4 kN
INA RSTO12 Yoke type track rollers
Nodes bearings have INA RSTO12 bearings in stock, Yoke type track rollers, without axial guidance, outer ring without ribs, RSTO12 bearings dimensions: 16mm x 32mm x 11.8mm, Cr: 9000N, C0r: 10300N.
- Brand: INA
- Inside Diameter: 16 mm
- Outside Diameter: 32 mm
- Width: 11.8 mm
- Basic dynamic load rating: 9 kN
- Basic static load rating: 9 kN
INA RSTO15 Yoke type track rollers
Nodes bearings have INA RSTO15 bearings in stock, Yoke type track rollers, without axial guidance, outer ring without ribs, RSTO15 bearings dimensions: 20mm x 35mm x 11.8mm, Cr: 9100N, C0r: 10900N.
- Brand: INA
- Inside Diameter: 20 mm
- Outside Diameter: 35 mm
- Width: 11.8 mm
- Basic dynamic load rating: 9.1 kN
- Basic static load rating: 9.1 kN
INA RSTO25 Yoke type track rollers
Nodes bearings have INA RSTO25 bearings in stock, Yoke type track rollers, without axial guidance, outer ring without ribs, RSTO25 bearings dimensions: 30mm x 52mm x 15.8mm, Cr: 16400N, C0r: 23200N.
- Brand: INA
- Inside Diameter: 30 mm
- Outside Diameter: 52 mm
- Width: 15.8 mm
- Basic dynamic load rating: 16.4 kN
- Basic static load rating: 16.4 kN
INA RSTO30 Yoke type track rollers
Nodes bearings have INA RSTO30 bearings in stock, Yoke type track rollers, without axial guidance, outer ring without ribs, RSTO30 bearings dimensions: 38mm x 62mm x 19.8mm, Cr: 23100N, C0r: 35000N.
- Brand: INA
- Inside Diameter: 38 mm
- Outside Diameter: 62 mm
- Width: 19.8 mm
- Basic dynamic load rating: 23.1 kN
- Basic static load rating: 23.1 kN
INA RSTO35 Yoke type track rollers
Nodes bearings have INA RSTO35 bearings in stock, Yoke type track rollers, without axial guidance, outer ring without ribs, RSTO35 bearings dimensions: 42mm x 72mm x 19.8mm, Cr: 25000N, C0r: 40500N.
- Brand: INA
- Inside Diameter: 42 mm
- Outside Diameter: 72 mm
- Width: 19.8 mm
- Basic dynamic load rating: 25 kN
- Basic static load rating: 25 kN
INA RSTO40 Yoke type track rollers
Nodes bearings have INA RSTO40 bearings in stock, Yoke type track rollers, without axial guidance, outer ring without ribs, RSTO40 bearings dimensions: 50mm x 80mm x 19.8mm, Cr: 23700N, C0r: 39500N.
- Brand: INA
- Inside Diameter: 50 mm
- Outside Diameter: 80 mm
- Width: 19.8 mm
- Basic dynamic load rating: 23.7 kN
- Basic static load rating: 23.7 kN
INA RSTO45 Yoke type track rollers
Nodes bearings have INA RSTO45 bearings in stock, Yoke type track rollers, without axial guidance, outer ring without ribs, RSTO45 bearings dimensions: 55mm x 85mm x 19.8mm, Cr: 25000N, C0r: 43500N.
- Brand: INA
- Inside Diameter: 55 mm
- Outside Diameter: 85 mm
- Width: 19.8 mm
- Basic dynamic load rating: 25 kN
- Basic static load rating: 25 kN
INA RSTO50 Yoke type track rollers
Nodes bearings have INA RSTO50 bearings in stock, Yoke type track rollers, without axial guidance, outer ring without ribs, RSTO50 bearings dimensions: 60mm x 90mm x 19.8mm, Cr: 25500N, C0r: 46000N.
- Brand: INA
- Inside Diameter: 60 mm
- Outside Diameter: 90 mm
- Width: 19.8 mm
- Basic dynamic load rating: 25.5 kN
- Basic static load rating: 25.5 kN
INA STO17 Yoke type track rollers
Nodes bearings have INA STO17 bearings in stock, Yoke type track rollers, without axial guidance, outer ring without ribs, STO17 bearings dimensions: 17mm x 40mm x 16mm, Cr: 14200N, C0r: 17900N.
- Brand: INA
- Inside Diameter: 17 mm
- Outside Diameter: 40 mm
- Width: 16 mm
- Basic dynamic load rating: 14.2 kN
- Basic static load rating: 14.2 kN
INA STO20 Yoke type track rollers
Nodes bearings have INA STO20 bearings in stock, Yoke type track rollers, without axial guidance, outer ring without ribs, STO20 bearings dimensions: 20mm x 47mm x 16mm, Cr: 16100N, C0r: 21700N.
- Brand: INA
- Inside Diameter: 20 mm
- Outside Diameter: 47 mm
- Width: 16 mm
- Basic dynamic load rating: 16.1 kN
- Basic static load rating: 16.1 kN
INA STO25 Yoke type track rollers
Nodes bearings have INA STO25 bearings in stock, Yoke type track rollers, without axial guidance, outer ring without ribs, STO25 bearings dimensions: 25mm x 52mm x 16mm, Cr: 16400N, C0r: 23200N.
- Brand: INA
- Inside Diameter: 25 mm
- Outside Diameter: 52 mm
- Width: 16 mm
- Basic dynamic load rating: 16.4 kN
- Basic static load rating: 16.4 kN
INA STO30 Yoke type track rollers
Nodes bearings have INA STO30 bearings in stock, Yoke type track rollers, without axial guidance, outer ring without ribs, STO30 bearings dimensions: 30mm x 62mm x 20mm, Cr: 23100N, C0r: 35000N.
- Brand: INA
- Inside Diameter: 30 mm
- Outside Diameter: 62 mm
- Width: 20 mm
- Basic dynamic load rating: 23.1 kN
- Basic static load rating: 23.1 kN
INA STO40 Yoke type track rollers
Nodes bearings have INA STO40 bearings in stock, Yoke type track rollers, without axial guidance, outer ring without ribs, STO40 bearings dimensions: 40mm x 80mm x 20mm, Cr: 23700N, C0r: 39500N.
- Brand: INA
- Inside Diameter: 40 mm
- Outside Diameter: 80 mm
- Width: 20 mm
- Basic dynamic load rating: 23.7 kN
- Basic static load rating: 23.7 kN