KAYDON type C thin section bearing, Precision class 1 (Ref. ABEC 1F)
Bearing size (inch series) |
Bearing diameters |
Radial & Axial runout |
Rotating Shaftor Duplex DF Mounting |
Stationary Shaftor Duplex DB Mounting |
Bearing Diametral clearance* before installation |
Bearing Bore Nominal |
Bearing O.D. Nominal |
Inner Race |
Outer Race |
Shaft Diameter Nominal |
Housing Bore Nominal |
Shaft Diameter Nominal |
Housing Bore Nominal |
010 |
-0.0004 |
-0.0005 |
0.0005 |
0.0008 |
0.0004 |
0.0005 |
-0.0004 |
-0.0008 |
-0.0005 |
-0.001 |
0.001 |
0.0016 |
015 |
-0.0005 |
-0.0005 |
0.0006 |
0.0008 |
0.0005 |
0.0005 |
-0.0005 |
-0.001 |
-0.0005 |
-0.001 |
0.0012 |
0.0018 |
017 |
-0.0006 |
-0.0005 |
0.0008 |
0.001 |
0.0006 |
0.0005 |
-0.0006 |
-0.0012 |
-0.0005 |
-0.001 |
0.0012 |
0.0024 |
020 |
-0.0006 |
-0.0005 |
0.0008 |
0.001 |
0.0006 |
0.0005 |
-0.0006 |
-0.0012 |
-0.0005 |
-0.001 |
0.0012 |
0.0024 |
025 |
-0.0006 |
-0.0005 |
0.0008 |
0.001 |
0.0006 |
0.0005 |
-0.0006 |
-0.0012 |
-0.0005 |
-0.001 |
0.0012 |
0.0024 |
030 |
-0.0006 |
-0.0006 |
0.0008 |
0.001 |
0.0006 |
0.0006 |
-0.0006 |
-0.0012 |
-0.0006 |
-0.0012 |
0.0012 |
0.0024 |
035 |
-0.0008 |
-0.0006 |
0.001 |
0.0012 |
0.0008 |
0.0006 |
-0.0008 |
-0.0016 |
-0.0006 |
-0.0012 |
0.0016 |
0.0028 |
040 |
-0.0008 |
-0.0006 |
0.001 |
0.0012 |
0.0008 |
0.0006 |
-0.0008 |
-0.0016 |
-0.0006 |
-0.0012 |
0.0016 |
0.0028 |
042 |
-0.0008 |
-0.0008 |
0.001 |
0.0014 |
0.0008 |
0.0008 |
-0.0008 |
-0.0016 |
-0.0008 |
-0.0016 |
0.0016 |
0.0028 |
045 |
-0.0008 |
-0.0008 |
0.001 |
0.0014 |
0.0008 |
0.0008 |
-0.0008 |
-0.0016 |
-0.0008 |
-0.0016 |
0.0016 |
0.0028 |
047 |
-0.001 |
-0.0008 |
0.0012 |
0.0014 |
0.001 |
0.0008 |
-0.001 |
-0.002 |
-0.0008 |
-0.0016 |
0.002 |
0.0034 |
050 |
-0.001 |
-0.0008 |
0.0012 |
0.0014 |
0.001 |
0.0008 |
-0.001 |
-0.002 |
-0.0008 |
-0.0016 |
0.002 |
0.0034 |
055 |
-0.001 |
-0.001 |
0.0012 |
0.0016 |
0.001 |
0.001 |
-0.001 |
-0.002 |
-0.001 |
-0.002 |
0.002 |
0.0034 |
060 |
-0.001 |
-0.001 |
0.0012 |
0.0016 |
0.001 |
0.001 |
-0.001 |
-0.002 |
-0.001 |
-0.002 |
0.002 |
0.0034 |
065 |
-0.001 |
-0.001 |
0.0012 |
0.0016 |
0.001 |
0.001 |
-0.001 |
-0.002 |
-0.001 |
-0.002 |
0.002 |
0.0034 |
070 |
-0.001 |
-0.0012 |
0.0012 |
0.0016 |
0.001 |
0.0012 |
-0.001 |
-0.002 |
-0.0012 |
-0.0024 |
0.0024 |
0.0042 |
075 |
-0.0012 |
-0.0012 |
0.0016 |
0.0018 |
0.0012 |
0.0012 |
-0.0012 |
-0.0024 |
-0.0012 |
-0.0024 |
0.0024 |
0.0042 |
080 |
-0.0012 |
-0.0012 |
0.0016 |
0.0018 |
0.0012 |
0.0012 |
-0.0012 |
-0.0024 |
-0.0012 |
-0.0024 |
0.0024 |
0.0042 |
090 |
-0.0012 |
-0.0012 |
0.0016 |
0.0018 |
0.0012 |
0.0012 |
-0.0012 |
-0.0024 |
-0.0012 |
-0.0024 |
0.0024 |
0.0042 |
100 |
-0.0014 |
-0.0014 |
0.0018 |
0.002 |
0.0014 |
0.0014 |
-0.0014 |
-0.0028 |
-0.0014 |
-0.0028 |
0.0028 |
0.0048 |
110 |
-0.0014 |
-0.0014 |
0.0018 |
0.002 |
0.0014 |
0.0014 |
-0.0014 |
-0.0028 |
-0.0014 |
-0.0028 |
0.0028 |
0.0048 |
120 |
-0.0014 |
-0.0014 |
0.0018 |
0.002 |
0.0014 |
0.0014 |
-0.0014 |
-0.0028 |
-0.0014 |
-0.0028 |
0.0028 |
0.0048 |
140 |
-0.0016 |
-0.0016 |
0.0018 |
0.002 |
0.0016 |
0.0016 |
-0.0016 |
-0.0032 |
-0.0016 |
-0.0032 |
0.0032 |
0.0052 |
160 |
-0.0018 |
-0.0018 |
0.0018 |
0.002 |
0.0018 |
0.0018 |
-0.0018 |
-0.0036 |
-0.0018 |
-0.0036 |
0.0036 |
0.0056 |
180 |
-0.0018 |
-0.0018 |
0.002 |
0.002 |
0.0018 |
0.0018 |
-0.0018 |
-0.0036 |
-0.0018 |
-0.0036 |
0.0036 |
0.0056 |
200 |
-0.002 |
-0.002 |
0.002 |
0.002 |
0.002 |
0.002 |
-0.002 |
-0.004 |
-0.002 |
-0.004 |
0.004 |
0.006 |
210 |
-0.002 |
-0.002 |
0.002 |
0.002 |
0.002 |
0.002 |
-0.002 |
-0.004 |
-0.002 |
-0.004 |
0.004 |
0.006 |
220 |
-0.002 |
-0.002 |
0.002 |
0.002 |
0.002 |
0.002 |
-0.002 |
-0.004 |
-0.002 |
-0.004 |
0.004 |
0.006 |
250 |
-0.003 |
-0.003 |
0.002 |
0.002 |
0.003 |
0.003 |
-0.003 |
-0.006 |
-0.003 |
-0.006 |
0.006 |
0.008 |
300 |
-0.003 |
-0.003 |
0.002 |
0.002 |
0.003 |
0.003 |
-0.003 |
-0.006 |
-0.003 |
-0.006 |
0.006 |
0.008 |
350 |
-0.004 |
-0.004 |
0.002 |
0.002 |
0.004 |
0.004 |
-0.004 |
-0.008 |
-0.004 |
-0.008 |
0.008 |
0.01 |
400 |
-0.004 |
-0.004 |
0.002 |
0.002 |
0.004 |
0.004 |
-0.004 |
-0.008 |
-0.004 |
-0.008 |
0.008 |
0.01 |
*Diametral clearance after installation theoretically can range rather widely if all contributing bearing, housing, and shaft tolerances are at either of their extremes.
Listed shaft and housing diameters are for steel supports with standard bearing diametral clearance. Recommended shaft and housing diameters can change greatly based on orientation, temperature, speed, non-standard diametral clearances, and desired performance characteristics. Contact Kaydon for design assistance when required.
KAYDON type A thin section bearing, Precision class 1 (Ref. ABEC 1F)
Kaydon Bearing size (inch series) |
Bearing diameters |
Radial & Axial runout |
Rotating Shaftor Duplex DF Mounting |
Stationary Shaftor Duplex DB Mounting |
Bearing Diametral clearance* before installation |
Bearing Bore Nominal |
Bearing O.D. Nominal |
Inner Race |
Outer Race |
Shaft Diameter Nominal |
Housing Bore Nominal |
Shaft Diameter Nominal |
Housing Bore Nominal |
010 |
-0.0004 |
-0.0005 |
0.0003 |
0.0004 |
0.0004 |
0.0005 |
-0.0004 |
-0.0008 |
-0.0005 |
-0.001 |
0.001 |
0.0015 |
015 |
-0.0005 |
-0.0005 |
0.0004 |
0.0004 |
0.0005 |
0.0005 |
-0.0005 |
-0.001 |
-0.0005 |
-0.001 |
0.0012 |
0.0017 |
017 |
-0.0006 |
-0.0005 |
0.0005 |
0.0005 |
0.0006 |
0.0005 |
-0.0006 |
-0.0012 |
-0.0005 |
-0.001 |
0.0012 |
0.0022 |
020 |
-0.0006 |
-0.0005 |
0.0005 |
0.0005 |
0.0006 |
0.0005 |
-0.0006 |
-0.0012 |
-0.0005 |
-0.001 |
0.0012 |
0.0022 |
025 |
-0.0006 |
-0.0005 |
0.0005 |
0.0005 |
0.0006 |
0.0005 |
-0.0006 |
-0.0012 |
-0.0005 |
-0.001 |
0.0012 |
0.0022 |
030 |
-0.0006 |
-0.0006 |
0.0006 |
0.0006 |
0.0006 |
0.0006 |
-0.0006 |
-0.0012 |
-0.0006 |
-0.0012 |
0.0012 |
0.0022 |
035 |
-0.0008 |
-0.0006 |
0.0006 |
0.0006 |
0.0008 |
0.0006 |
-0.0008 |
-0.0016 |
-0.0006 |
-0.0012 |
0.0016 |
0.0026 |
040 |
-0.0008 |
-0.0006 |
0.0006 |
0.0006 |
0.0008 |
0.0006 |
-0.0008 |
-0.0016 |
-0.0006 |
-0.0012 |
0.0016 |
0.0026 |
042 |
-0.0008 |
-0.0008 |
0.0008 |
0.0008 |
0.0008 |
0.0008 |
-0.0008 |
-0.0016 |
-0.0008 |
.-00016 |
0.0016 |
0.0026 |
045 |
-0.0008 |
-0.0008 |
0.0008 |
0.0008 |
0.0008 |
0.0008 |
-0.0008 |
-0.0016 |
-0.0008 |
-0.0016 |
0.0016 |
0.0026 |
047 |
-0.001 |
-0.0008 |
0.0008 |
0.0008 |
0.001 |
0.0008 |
-0.001 |
-0.002 |
-0.0008 |
-0.0016 |
0.002 |
0.003 |
050 |
-0.001 |
-0.0008 |
0.0008 |
0.0008 |
0.001 |
0.0008 |
-0.001 |
-0.002 |
-0.0008 |
-0.0016 |
0.002 |
0.003 |
055 |
-0.001 |
-0.001 |
0.001 |
0.001 |
0.001 |
0.001 |
-0.001 |
-0.002 |
-0.001 |
-0.002 |
0.002 |
0.003 |
060 |
-0.001 |
-0.001 |
0.001 |
0.001 |
0.001 |
0.001 |
-0.001 |
-0.002 |
-0.001 |
-0.002 |
0.002 |
0.003 |
065 |
-0.001 |
-0.001 |
0.001 |
0.001 |
0.001 |
0.001 |
-0.001 |
-0.002 |
-0.001 |
-0.002 |
0.002 |
0.003 |
070 |
-0.001 |
-0.0012 |
0.001 |
0.001 |
0.001 |
0.0012 |
-0.001 |
-0.002 |
-0.0012 |
-0.0024 |
0.0024 |
0.0034 |
075 |
-0.0012 |
-0.0012 |
0.0012 |
0.0012 |
0.0012 |
0.0012 |
-0.0012 |
-0.0024 |
-0.0012 |
-0.0024 |
0.0024 |
0.0034 |
080 |
-0.0012 |
-0.0012 |
0.0012 |
0.0012 |
0.0012 |
0.0012 |
-0.0012 |
-0.0024 |
-0.0012 |
-0.0024 |
0.0024 |
0.0034 |
090 |
-0.0012 |
-0.0012 |
0.0012 |
0.0012 |
0.0012 |
0.0012 |
-0.0012 |
-0.0024 |
-0.0012 |
-0.0024 |
0.0024 |
0.0034 |
100 |
-0.0014 |
-0.0014 |
0.0014 |
0.0014 |
0.0014 |
0.0014 |
-0.0014 |
-0.0028 |
-0.0014 |
-0.0028 |
0.0028 |
0.0038 |
110 |
-0.0014 |
-0.0014 |
0.0014 |
0.0014 |
0.0014 |
0.0014 |
-0.0014 |
-0.0028 |
-0.0014 |
-0.0028 |
0.0028 |
0.0038 |
120 |
-0.0014 |
-0.0014 |
0.0014 |
0.0014 |
0.0014 |
0.0014 |
-0.0014 |
-0.0028 |
-0.0014 |
-0.0028 |
0.0028 |
0.0038 |
140 |
-0.0014 |
-0.0014 |
0.0014 |
0.0014 |
0.0014 |
0.0014 |
-0.0014 |
-0.0028 |
-0.0014 |
-0.0028 |
0.0028 |
0.0038 |
160 |
-0.0016 |
-0.0016 |
0.0016 |
0.0016 |
0.0016 |
0.0016 |
-0.0016 |
-0.0032 |
-0.0016 |
-0.0032 |
0.0032 |
0.0042 |
180 |
-0.0016 |
-0.0016 |
0.0016 |
0.0016 |
0.0016 |
0.0016 |
-0.0016 |
-0.0032 |
-0.0016 |
-0.0032 |
0.0032 |
0.0042 |
200 |
-0.0018 |
-0.0018 |
0.0018 |
0.0018 |
0.0018 |
0.0018 |
-0.0018 |
-0.0036 |
-18 |
-0.0036 |
0.0036 |
0.0046 |
210 |
-0.0018 |
-0.0018 |
0.0018 |
0.0018 |
0.0018 |
0.0018 |
-0.0018 |
-0.0036 |
-18 |
-0.0036 |
0.0036 |
0.0046 |
220 |
-0.0018 |
-0.0018 |
0.0018 |
0.0018 |
0.0018 |
0.0018 |
-0.0018 |
-0.0036 |
-18 |
-0.0036 |
0.0036 |
0.0046 |
250 |
-0.0018 |
-0.0018 |
0.0018 |
0.0018 |
0.0018 |
0.0018 |
-0.0018 |
-0.0036 |
-0.0018 |
-0.0036 |
0.0036 |
0.0046 |
300 |
-0.0018 |
-0.0018 |
0.0018 |
0.0018 |
0.0018 |
0.0018 |
-0.0018 |
-0.0036 |
-0.0018 |
-0.0036 |
0.0036 |
0.0046 |
350 |
-0.002 |
-0.002 |
0.002 |
0.002 |
0.002 |
0.002 |
-0.002 |
-0.004 |
-0.002 |
-0.004 |
0.004 |
0.005 |
400 |
-0.002 |
-0.002 |
0.002 |
0.002 |
0.002 |
0.002 |
-0.002 |
-0.004 |
-0.002 |
-0.004 |
0.004 |
0.005 |
* Diametral clearance after installation theoretically can range rather widely if all contributing bearing, housing, and shaft tolerances are at either of their extremes. Diametral clearances shown do not apply to Type A (angular contact) bearings.
Listed shaft and housing diameters are for steel supports with standard bearing diametral clearance. Recommended shaft and housing diameters can change greatly based on orientation, temperature, speed, non-standard diametral clearances, and desired performance characteristics. Contact Kaydon for design assistance when required.
KAYDON type C, X and A thin section bearing, Precision class 3 (Ref. ABEC 3F)
Bearing size (inch series) |
Bearing diameters |
Radial & Axial runout |
Rotating Shaftor Duplex DF Mounting |
Stationary Shaftor Duplex DB Mounting |
Bearing Diametral clearance* (Type "X" and "C" only) before installation |
Bearing Bore Nominal |
Bearing O.D. Nominal |
Inner Race |
Outer Race |
Shaft Diameter Nominal |
Housing Bore Nominal |
Shaft Diameter Nominal |
Housing Bore Nominal |
010 |
–.0002 |
–.0003 |
0.0003 |
0.0004 |
0.0002 |
0.0003 |
–.0002 |
–.0004 |
–.0003 |
–.0006 |
0.0007 |
0.0011 |
015 |
–.0003 |
–.0003 |
0.0004 |
0.0004 |
0.0003 |
0.0003 |
–.0003 |
–.0006 |
–.0003 |
–.0006 |
0.0008 |
0.0012 |
017 |
–.0004 |
–.0004 |
0.0004 |
0.0005 |
0.0004 |
0.0004 |
–.0004 |
–.0008 |
–.0004 |
–.0008 |
0.0008 |
0.0018 |
020 |
–.0004 |
–.0004 |
0.0004 |
0.0005 |
0.0004 |
0.0004 |
–.0004 |
–.0008 |
–.0004 |
–.0008 |
0.0008 |
0.0018 |
025 |
–.0004 |
–.0004 |
0.0004 |
0.0005 |
0.0004 |
0.0004 |
–.0004 |
–.0008 |
–.0004 |
–.0008 |
0.0008 |
0.0018 |
030 |
–.0004 |
–.0004 |
0.0004 |
0.0006 |
0.0004 |
0.0004 |
–.0004 |
–.0008 |
–.0004 |
–.0008 |
0.0008 |
0.0018 |
035 |
–.0005 |
–.0004 |
0.0005 |
0.0006 |
0.0005 |
0.0004 |
–.0005 |
–.0010 |
–.0004 |
–.0008 |
0.001 |
0.002 |
040 |
–.0005 |
–.0004 |
0.0005 |
0.0006 |
0.0005 |
0.0004 |
–.0005 |
–.0010 |
–.0004 |
–.0008 |
0.001 |
0.002 |
042 |
–.0005 |
–.0005 |
0.0005 |
0.0008 |
0.0005 |
0.0005 |
–.0005 |
–.0010 |
–.0005 |
.–0010 |
0.001 |
0.002 |
045 |
–.0005 |
–.0005 |
0.0005 |
0.0008 |
0.0005 |
0.0005 |
–.0005 |
–.0010 |
–.0005 |
–.0010 |
0.001 |
0.002 |
047 |
–.0006 |
–.0005 |
0.0006 |
0.0008 |
0.0006 |
0.0005 |
–.0006 |
–.0012 |
–.0005 |
–.0010 |
0.0012 |
0.0022 |
050 |
–.0006 |
–.0005 |
0.0006 |
0.0008 |
0.0006 |
0.0005 |
–.0006 |
–.0012 |
–.0005 |
–.0010 |
0.0012 |
0.0022 |
055 |
–.0006 |
–.0006 |
0.0006 |
0.0009 |
0.0006 |
0.0006 |
–.0006 |
–.0012 |
–.0006 |
–.0012 |
0.0012 |
0.0022 |
060 |
–.0006 |
–.0006 |
0.0006 |
0.0009 |
0.0006 |
0.0006 |
–.0006 |
–.0012 |
–.0006 |
–.0012 |
0.0012 |
0.0022 |
065 |
–.0006 |
–.0006 |
0.0006 |
0.0009 |
0.0006 |
0.0006 |
–.0006 |
–.0012 |
–.0006 |
–.0012 |
0.0012 |
0.0022 |
070 |
–.0006 |
–.0007 |
0.0006 |
0.001 |
0.0006 |
0.0007 |
–.0006 |
–.0012 |
–.0007 |
–.0014 |
0.0014 |
0.0024 |
075 |
–.0007 |
–.0007 |
0.0008 |
0.001 |
0.0007 |
0.0007 |
–.0007 |
–.0014 |
–.0007 |
–.0014 |
0.0014 |
0.0024 |
080 |
–.0007 |
–.0007 |
0.0008 |
0.001 |
0.0007 |
0.0007 |
–.0007 |
–.0014 |
–.0007 |
–.0014 |
0.0014 |
0.0024 |
090 |
–.0007 |
–.0007 |
0.0008 |
0.001 |
0.0007 |
0.0007 |
–.0007 |
–.0014 |
–.0007 |
–.0014 |
0.0014 |
0.0024 |
100 |
–.0008 |
–.0008 |
0.001 |
0.0012 |
0.0008 |
0.0008 |
–.0008 |
–.0016 |
–.0008 |
–.0016 |
0.0016 |
0.0026 |
110 |
–.0008 |
–.0008 |
0.001 |
0.0012 |
0.0008 |
0.0008 |
–.0008 |
–.0016 |
–.0008 |
–.0016 |
0.0016 |
0.0026 |
120 |
–.0008 |
–.0009 |
0.001 |
0.0014 |
0.0008 |
0.0009 |
–.0008 |
–.0016 |
–.0009 |
–.0018 |
0.0018 |
0.0028 |
140 |
–.0008 |
–.0009 |
0.0012 |
0.0014 |
0.0008 |
0.0009 |
–.0008 |
–.0016 |
–.0009 |
–.0018 |
0.0018 |
0.0028 |
160 |
–.0009 |
–.0010 |
0.0014 |
0.0016 |
0.0009 |
0.001 |
–.0009 |
–.0018 |
–.0010 |
–.0020 |
0.002 |
0.003 |
180 |
–.0009 |
–.0010 |
0.0014 |
0.0016 |
0.0009 |
0.001 |
–.0009 |
–.0018 |
–.0010 |
–.0020 |
0.002 |
0.003 |
200 |
–.0010 |
–.0012 |
0.0016 |
0.0018 |
0.001 |
0.0012 |
–.0010 |
–.0020 |
–.0012 |
–.0024 |
0.0024 |
0.0034 |
KAYDON type C, X and A thin section bearing, Precision class 4 (Ref. ABEC 4F)
Bearing size (inch series) |
Bearing diameters |
Radial & Axial Runout |
Rotating Shaft or Duplex DF Mounting |
Stationary Shaft or Duplex DB Mounting |
Bearing Diametral Clearance* (Type “X”and “C” only) Before Installation |
Bearing Bore Nominal |
Bearing O.D. Nominal |
Inner Race |
Outer Race |
Shaft Diameter Nominal |
Housing Bore Nominal |
Shaft Diameter Nominal |
Housing Bore Nominal |
Radial |
Axial |
Radial |
Axial |
010 |
-0.0002 |
-0.0002 |
0.0002 |
0.0003 |
0.0002 |
0.0003 |
0.0002 |
0.0002 |
-0.0002 |
-0.0004 |
-0.0002 |
-0.0004 |
0.0005 |
0.0009 |
015 |
-0.0002 |
-0.0002 |
0.0002 |
0.0003 |
0.0002 |
0.0003 |
0.0002 |
0.0002 |
-0.0002 |
-0.0004 |
-0.0002 |
-0.0004 |
0.0005 |
0.0009 |
017 |
-0.0003 |
-0.0003 |
0.0002 |
0.0003 |
0.0003 |
0.0004 |
0.0003 |
0.0003 |
-0.0003 |
-0.0006 |
-0.0003 |
-0.0006 |
0.0006 |
0.0012 |
020 |
-0.0003 |
-0.0003 |
0.0002 |
0.0003 |
0.0003 |
0.0004 |
0.0003 |
0.0003 |
-0.0003 |
-0.0006 |
-0.0003 |
-0.0006 |
0.0006 |
0.0012 |
025 |
-0.0003 |
-0.0003 |
0.0002 |
0.0003 |
0.0003 |
0.0004 |
0.0003 |
0.0003 |
-0.0003 |
-0.0006 |
-0.0003 |
-0.0006 |
0.0006 |
0.0012 |
030 |
-0.0003 |
-0.0003 |
0.0002 |
0.0003 |
0.0004 |
0.0005 |
0.0003 |
0.0003 |
-0.0003 |
-0.0006 |
-0.0003 |
-0.0006 |
0.0006 |
0.0012 |
035 |
-0.0003 |
-0.0003 |
0.0003 |
0.0004 |
0.0004 |
0.0005 |
0.0003 |
0.0003 |
-0.0003 |
-0.0006 |
-0.0003 |
-0.0006 |
0.0006 |
0.0012 |
040 |
-0.0003 |
-0.0003 |
0.0003 |
0.0004 |
0.0004 |
0.0005 |
0.0003 |
0.0003 |
-0.0003 |
-0.0006 |
-0.0003 |
-0.0006 |
0.0006 |
0.0012 |
042 |
-0.0003 |
-0.0004 |
0.0003 |
0.0004 |
0.0004 |
0.0005 |
0.0003 |
0.0004 |
-0.0003 |
-0.0006 |
-0.0004 |
-0.0008 |
0.0008 |
0.0014 |
045 |
-0.0003 |
-0.0004 |
0.0003 |
0.0004 |
0.0004 |
0.0005 |
0.0003 |
0.0004 |
-0.0003 |
-0.0006 |
-0.0004 |
-0.0008 |
0.0008 |
0.0014 |
047 |
-0.0004 |
-0.0004 |
0.0003 |
0.0004 |
0.0004 |
0.0005 |
0.0004 |
0.0004 |
-0.0004 |
-0.0008 |
-0.0004 |
-0.0008 |
0.0008 |
0.0014 |
050 |
-0.0004 |
-0.0004 |
0.0003 |
0.0004 |
0.0004 |
0.0005 |
0.0004 |
0.0004 |
-0.0004 |
-0.0008 |
-0.0004 |
-0.0008 |
0.0008 |
0.0014 |
055 |
-0.0004 |
-0.0005 |
0.0003 |
0.0004 |
0.0005 |
0.0006 |
0.0004 |
0.0005 |
-0.0004 |
-0.0008 |
-0.0005 |
-0.001 |
0.001 |
0.0016 |
060 |
-0.0004 |
-0.0005 |
0.0003 |
0.0004 |
0.0005 |
0.0006 |
0.0004 |
0.0005 |
-0.0004 |
-0.0008 |
-0.0005 |
-0.001 |
0.001 |
0.0016 |
065 |
-0.0004 |
-0.0005 |
0.0003 |
0.0004 |
0.0005 |
0.0006 |
0.0004 |
0.0005 |
-0.0004 |
-0.0008 |
-0.0005 |
-0.001 |
0.001 |
0.0016 |
070 |
-0.0004 |
-0.0005 |
0.0003 |
0.0004 |
0.0005 |
0.0006 |
0.0004 |
0.0005 |
-0.0004 |
-0.0008 |
-0.0005 |
-0.001 |
0.001 |
0.0016 |
075 |
-0.0005 |
-0.0005 |
0.0004 |
0.0005 |
0.0005 |
0.0006 |
0.0005 |
0.0005 |
-0.0005 |
-0.001 |
-0.0005 |
-0.001 |
0.001 |
0.0016 |
080 |
-0.0005 |
-0.0005 |
0.0004 |
0.0005 |
0.0005 |
0.0006 |
0.0005 |
0.0005 |
-0.0005 |
-0.001 |
-0.0005 |
-0.001 |
0.001 |
0.0016 |
090 |
-0.0005 |
-0.0005 |
0.0004 |
0.0005 |
0.0005 |
0.0006 |
0.0005 |
0.0005 |
-0.0005 |
-0.001 |
-0.0005 |
-0.001 |
0.001 |
0.0016 |
100 |
-0.0005 |
-0.0005 |
0.0005 |
0.0006 |
0.0006 |
0.0007 |
0.0005 |
0.0005 |
-0.0005 |
-0.001 |
-0.0005 |
-0.001 |
0.001 |
0.0016 |
110 |
-0.0005 |
-0.0005 |
0.0005 |
0.0006 |
0.0006 |
0.0007 |
0.0005 |
0.0005 |
-0.0005 |
-0.001 |
-0.0005 |
-0.001 |
0.001 |
0.0016 |
120 |
-0.0005 |
-0.0006 |
0.0005 |
0.0006 |
0.0007 |
0.0008 |
0.0005 |
0.0006 |
-0.0005 |
-0.001 |
-0.0006 |
-0.0012 |
0.0012 |
0.0018 |
140 |
-0.0006 |
-0.0006 |
0.0005 |
0.0007 |
0.0007 |
0.0008 |
0.0006 |
0.0006 |
-0.0006 |
-0.0012 |
-0.0006 |
-0.0012 |
0.0012 |
0.0018 |
160 |
-0.0006 |
-0.0007 |
0.0007 |
0.0008 |
0.0008 |
0.0009 |
0.0006 |
0.0007 |
-0.0006 |
-0.0012 |
-0.0007 |
-0.0014 |
0.0014 |
0.002 |
180 |
-0.0006 |
-0.0007 |
0.0007 |
0.0008 |
0.0008 |
0.0009 |
0.0006 |
0.0007 |
-0.0006 |
-0.0012 |
-0.0007 |
-0.0014 |
0.0014 |
0.002 |
200 |
-0.0007 |
-0.0008 |
0.0008 |
0.0009 |
0.0009 |
0.001 |
0.0007 |
0.0008 |
-0.0006 |
-0.0014 |
-0.0007 |
-0.0016 |
0.0016 |
0.0022 |
KAYDON type C, X and A thin section bearing, Precision class 6 (Ref. ABEC 7F)
Bearing size (inch series) |
Bearing diameters |
Radial & Axial runout |
Rotating Shaftor Duplex DF Mounting |
Stationary Shaftor Duplex DB Mounting |
Bearing Diametral clearance* (Type "X" and "C" only) before installation |
Bearing Bore Nominal |
Bearing O.D. Nominal |
Inner Race |
Outer Race |
Shaft Diameter Nominal |
Housing Bore Nominal |
Shaft Diameter Nominal |
Housing Bore Nominal |
10 |
–.00015 |
–.0002 |
0.00015 |
0.0002 |
0.00015 |
0.0002 |
–.00015 |
–.0003 |
–.0002 |
–.0004 |
0.0004 |
0.0008 |
15 |
–.0002 |
–.0002 |
0.00015 |
0.0002 |
0.0002 |
0.0002 |
–.0002 |
–.0004 |
–.0002 |
–.0004 |
0.0004 |
0.0008 |
17 |
–.0002 |
–.0002 |
0.00015 |
0.0002 |
0.0002 |
0.0002 |
–.0002 |
–.0004 |
–.0002 |
–.0004 |
0.0004 |
0.001 |
20 |
–.0002 |
–.0002 |
0.00015 |
0.0002 |
0.0002 |
0.0002 |
–.0002 |
–.0004 |
–.0002 |
–.0004 |
0.0004 |
0.001 |
25 |
–.0002 |
–.0002 |
0.00015 |
0.0002 |
0.0002 |
0.0002 |
–.0002 |
–.0004 |
–.0002 |
–.0004 |
0.0004 |
0.001 |
30 |
–.0002 |
–.0003 |
0.00015 |
0.0002 |
0.0002 |
0.0003 |
–.0002 |
–.0004 |
–.0003 |
–.0006 |
0.0006 |
0.0012 |
35 |
–.00025 |
–.0003 |
0.0002 |
0.0002 |
0.00025 |
0.0003 |
–.00025 |
–.0005 |
–.0003 |
–.0006 |
0.0006 |
0.0012 |
40 |
–.00025 |
–.0003 |
0.0002 |
0.0002 |
0.00025 |
0.0003 |
–.00025 |
–.0005 |
–.0003 |
–.0006 |
0.0006 |
0.0012 |
42 |
–.00025 |
–.0004 |
0.0002 |
0.0003 |
0.00025 |
0.0004 |
–.00025 |
–.0005 |
–.0004 |
–.0008 |
0.0008 |
0.0014 |
45 |
–.00025 |
–.0004 |
0.0002 |
0.0003 |
0.00025 |
0.0004 |
–.00025 |
–.0005 |
–.0004 |
–.0008 |
0.0008 |
0.0014 |
47 |
–.0003 |
–.0004 |
0.0003 |
0.0003 |
0.0003 |
0.0004 |
–.0003 |
–.0006 |
–.0004 |
–.0008 |
0.0008 |
0.0014 |
50 |
–.0003 |
–.0004 |
0.0003 |
0.0003 |
0.0003 |
0.0004 |
–.0003 |
–.0006 |
–.0004 |
–.0008 |
0.0008 |
0.0014 |
55 |
–.0003 |
–.0004 |
0.0003 |
0.0003 |
0.0003 |
0.0004 |
–.0003 |
–.0006 |
–.0004 |
–.0008 |
0.0008 |
0.0014 |
60 |
–.0003 |
–.0004 |
0.0003 |
0.0003 |
0.0003 |
0.0004 |
–.0003 |
–.0006 |
–.0004 |
–.0008 |
0.0008 |
0.0014 |
65 |
–.0003 |
–.0004 |
0.0003 |
0.0003 |
0.0003 |
0.0004 |
–.0003 |
–.0006 |
–.0004 |
–.0008 |
0.0008 |
0.0014 |
70 |
–.0003 |
–.0004 |
0.0003 |
0.0004 |
0.0003 |
0.0004 |
–.0003 |
–.0006 |
–.0004 |
–.0008 |
0.0008 |
0.0014 |
75 |
–.0004 |
–.0004 |
0.0003 |
0.0004 |
0.0004 |
0.0004 |
–.0004 |
–.0008 |
–.0004 |
–.0008 |
0.0008 |
0.0014 |
80 |
–.0004 |
–.0004 |
0.0003 |
0.0004 |
0.0004 |
0.0004 |
–.0004 |
–.0008 |
–.0004 |
–.0008 |
0.0008 |
0.0014 |
90 |
–.0004 |
–.0004 |
0.0003 |
0.0004 |
0.0004 |
0.0004 |
–.0004 |
–.0008 |
–.0004 |
–.0008 |
0.0008 |
0.0014 |
100 |
–.0005 |
–.0005 |
0.0004 |
0.0004 |
0.0005 |
0.0005 |
–.0005 |
–.0010 |
–.0005 |
–.0010 |
0.001 |
0.0016 |
110 |
–.0005 |
–.0005 |
0.0004 |
0.0004 |
0.0005 |
0.0005 |
–.0005 |
–.0010 |
–.0005 |
–.0010 |
0.001 |
0.0016 |
120 |
–.0005 |
–.0005 |
0.0004 |
0.0005 |
0.0005 |
0.0005 |
–.0005 |
–.0010 |
–.0005 |
–.0010 |
0.001 |
0.0016 |
140 |
–.0005 |
–.0006 |
0.0004 |
0.0005 |
0.0005 |
0.0006 |
–.0005 |
–.0010 |
–.0006 |
–.0012 |
0.0012 |
0.0018 |
oterh articles about KAYDON ball bearings