As KAYDON bearing distributor, Nodes bearings have KAYDON thin section open bearings in stock. Welcome enquiry.
KAYDON Reali-Slim® bearings offer a wide variety of bearing solutions for even the most unique design challenges. Each Reali-Slim® ball bearing series is based on a single cross section which remains constant as the bore diameter is increased (in sharp contrast to standard bearings, in which the cross section increases as the bore diameter increases).
KAYDON thin section open bearings include internal fit up, lubricants, separators, and other features that meet the most demanding specifications. Stainless steel Reali-Slim® or Endura-Slim® series of ball bearings provide exceptional corrosion resistance.
Reali-Slim® ball bearings are available in a wide variety of separator options to space the rolling elements uniformly and prevent contact between them. Separator types available include: continuous ring "snap-over pocket," continuous ring circular pocket, formed wire, toroid, PTFE spacers, and ball bearing spacer separators.
Kaydon Reali-Slim® open thin section ball bearings range in bore diameters from 0.750 inch to 40.000 inches. The seven series in the Reali-Slim® product line range from .187 x .187 inch to 1.000 x 1.000 inch in cross section. Open bearings are available from stock in three configurations: angular contact bearings (Type A), Conrad assembled deep groove radial ball bearings (Type C), and four-point contact radial bearings (Type X).
Type A - angular contact
A deep groove bearing with reduced shoulder on one side of inner or outer race ball path. Snapover assembly permits use of a one-piece circular pocket ring separator and greater ball complement. These bearings will accept radial load and single direction thrust load and are normally used in conjunction with another bearing of similar construction. Type A bearings require the application of thrust to establish contact angle.
Type C - radial contact
A Conrad assembled bearing designed primarily for application of radial load—deep ball grooves also permit application of some thrust load in either direction—often used in conjunction with another bearing.
Type X - four-point contact
A Conrad assembled bearing designed for applications involving multiple loads. Unique internal geometry permits application of radial load, thrust load in either direction, and moment load, individually or in any combination. A single four-point contact bearing may replace two bearings in many applications.
related articles
- kaydon thin section applications
- kaydon thin section bearing mounting
- identification of KAYDON Reali-slim thin section bearings
- kaydon thin section bearings lubrication and maintenance
- kaydon thin section bearings selection
- KAYDON thin section bearings overview
- KAYDON thin section bearings support all load scenarios
- KAYDON thin section bearing precision tolerances
Related numbers
KAYDON KAA15AG0 bearings
1.500" x 1.875" x 0.1875"
KAYDON KAA17AG0 bearings
1.750" x 2.125" x 0.1875"
KAYDON KAA10CL0 bearings
1.000" x 1.375" x 0.1875"
KAYDON KAA10XL0 bearings
1.000" x 1.375" x 0.1875"
KAYDON KAA15XL0 bearings
1.500" x 1.875" x 0.1875"
KAYDON KA020AR0 bearings
2.000" x 2.500" x 0.25"
KAYDON KA025AR0 bearings
2.500" x 3.000" x 0.25"
