FAG B7016-C-2RSD-T-P4S spindle bearings | 80x125x22mm
Also known as : B7016-C-2RSD-T-P4S
- Inside Diameter: 80 mm
- Outside Diameter: 125 mm
- Width: 22 mm
- Basic dynamic load rating: 64 kN
- Basic static load rating: 41 kN
FAG B7016-C-2RSD-T-P4S Bearing
FAG B7016-C-2RSD-T-P4S Bearing details
Number | B7016-C-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 80 mm | |
D | 125 mm | |
B | 22 mm | |
a | 24,7 mm | |
Da | 117 mm | Tolerance: H12 |
da | 88 mm | Tolerance: h12 |
r1 min | 1,1 mm | |
ra max | 1 mm | |
ra1 max | 0,6 mm | |
rmin | 1,1 mm | |
α | 15 ° | Contact angle |
m | 0,84 kg | ≈ Mass |
Cr | 64000 N | Basic dynamic load rating, radial |
C0r | 41000 N | Basic static load rating, radial |
Cur | 4150 N | Fatigue limit load, radial |
nG Fett | 11000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 354 N | Preload force |
FV M | 1138 N | Preload force |
FV H | 2277 N | Preload force |
KaE L | 1091 N | Lift-off force |
KaE M | 3797 N | Lift-off force |
KaE H | 8119 N | Lift-off force |
ca L | 85,7 N/µm | Axial rigidity |
ca M | 145 N/µm | Axial rigidity |
ca H | 207 N/µm | Axial rigidity |
Nodes bearings have FAG B7016-C-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.