FAG B7216-E-T-P4S spindle bearings | 80x140x26mm
Also known as : B7216-E-T-P4S
- Inside Diameter: 80 mm
- Outside Diameter: 140 mm
- Width: 26 mm
- Basic dynamic load rating: 89 kN
- Basic static load rating: 52 kN
FAG B7216-E-T-P4S Bearing
FAG B7216-E-T-P4S Bearing details
Number | B7216-E-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 80 mm | |
D | 140 mm | |
B | 26 mm | |
a | 38,6 mm | |
Da | 129 mm | Tolerance: H12 |
da | 91 mm | Tolerance: h12 |
Etk max | 105,3 mm | |
Etk min | 100,5 mm | |
Etk1 max | 105,3 mm | |
Etk1 min | 100,5 mm | |
r1 min | 2 mm | |
ra max | 2 mm | |
ra1 max | 1 mm | |
rmin | 2 mm | |
α | 25 ° | Contact angle |
m | 1,42 kg | ≈ Mass |
Cr | 89000 N | Basic dynamic load rating, radial |
C0r | 52000 N | Basic static load rating, radial |
Cur | 5100 N | Fatigue limit load, radial |
nG Fett | 9000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 15000 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 833 N | Preload force |
FV M | 2764 N | Preload force |
FV H | 5699 N | Preload force |
KaE L | 2433 N | Lift-off force |
KaE M | 8347 N | Lift-off force |
KaE H | 17799 N | Lift-off force |
ca L | 221 N/µm | Axial rigidity |
ca M | 349 N/µm | Axial rigidity |
ca H | 472 N/µm | Axial rigidity |
Nodes bearings have FAG B7216-E-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.