FAG B71916-E-T-P4S spindle bearings | 80x110x16mm
Also known as : B71916-E-T-P4S
- Inside Diameter: 80 mm
- Outside Diameter: 110 mm
- Width: 16 mm
- Basic dynamic load rating: 33.5 kN
- Basic static load rating: 24 kN
FAG B71916-E-T-P4S Bearing
FAG B71916-E-T-P4S Bearing details
Number | B71916-E-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 80 mm | |
D | 110 mm | |
B | 16 mm | |
a | 30,1 mm | |
Da | 104 mm | Tolerance: H12 |
da | 86 mm | Tolerance: h12 |
Etk max | 92,2 mm | |
Etk min | 89,3 mm | |
Etk1 max | 92,2 mm | |
Etk1 min | 89,3 mm | |
r1 min | 1 mm | |
ra max | 0,6 mm | |
ra1 max | 0,3 mm | |
rmin | 1 mm | |
α | 25 ° | Contact angle |
m | 0,366 kg | ≈ Mass |
Cr | 33500 N | Basic dynamic load rating, radial |
C0r | 24000 N | Basic static load rating, radial |
Cur | 2470 N | Fatigue limit load, radial |
nG Fett | 11000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 17000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 237 N | Preload force |
FV M | 908 N | Preload force |
FV H | 1955 N | Preload force |
KaE L | 686 N | Lift-off force |
KaE M | 2718 N | Lift-off force |
KaE H | 6043 N | Lift-off force |
ca L | 160 N/µm | Axial rigidity |
ca M | 265 N/µm | Axial rigidity |
ca H | 362 N/µm | Axial rigidity |
Nodes bearings have FAG B71916-E-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.