FAG B7028-E-T-P4S spindle bearings | 140x210x33mm
Also known as : B7028-E-T-P4S
- Inside Diameter: 140 mm
- Outside Diameter: 210 mm
- Width: 33 mm
- Basic dynamic load rating: 145 kN
- Basic static load rating: 108 kN
FAG B7028-E-T-P4S Bearing
FAG B7028-E-T-P4S Bearing details
Number | B7028-E-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 140 mm | |
D | 210 mm | |
B | 33 mm | |
a | 57,3 mm | |
Da | 199 mm | Tolerance: H12 |
da | 152 mm | Tolerance: h12 |
Etk max | 169,2 mm | |
Etk min | 161,6 mm | |
Etk1 max | 169,2 mm | |
Etk1 min | 161,6 mm | |
r1 min | 2 mm | |
ra max | 2 mm | |
ra1 max | 1 mm | |
rmin | 2 mm | |
α | 25 ° | Contact angle |
m | 3,34 kg | ≈ Mass |
Cr | 145000 N | Basic dynamic load rating, radial |
C0r | 108000 N | Basic static load rating, radial |
Cur | 8400 N | Fatigue limit load, radial |
nG Fett | 5600 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 9000 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 1336 N | Preload force |
FV M | 4416 N | Preload force |
FV H | 9103 N | Preload force |
KaE L | 3888 N | Lift-off force |
KaE M | 13252 N | Lift-off force |
KaE H | 28168 N | Lift-off force |
ca L | 339 N/µm | Axial rigidity |
ca M | 532 N/µm | Axial rigidity |
ca H | 714 N/µm | Axial rigidity |
Nodes bearings have FAG B7028-E-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.