FAG B7228-E-T-P4S spindle bearings | 140x250x42mm
Also known as : B7228-E-T-P4S
- Inside Diameter: 140 mm
- Outside Diameter: 250 mm
- Width: 42 mm
- Basic dynamic load rating: 213 kN
- Basic static load rating: 157 kN
FAG B7228-E-T-P4S Bearing
FAG B7228-E-T-P4S Bearing details
Number | B7228-E-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 140 mm | |
D | 250 mm | |
B | 42 mm | |
a | 66,5 mm | |
Da | 226,5 mm | Tolerance: H12 |
da | 163 mm | Tolerance: h12 |
Etk max | 187 mm | |
Etk min | 175,9 mm | |
Etk1 max | 187 mm | |
Etk1 min | 175,9 mm | |
r1 min | 3 mm | |
ra max | 2,5 mm | |
ra1 max | 2,5 mm | |
rmin | 3 mm | |
α | 25 ° | Contact angle |
m | 7,86 kg | ≈ Mass |
Cr | 213000 N | Basic dynamic load rating, radial |
C0r | 157000 N | Basic static load rating, radial |
Cur | 11500 N | Fatigue limit load, radial |
nG Fett | 4500 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 6700 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 2141 N | Preload force |
FV M | 6870 N | Preload force |
FV H | 14029 N | Preload force |
KaE L | 6233 N | Lift-off force |
KaE M | 20615 N | Lift-off force |
KaE H | 43390 N | Lift-off force |
ca L | 373 N/µm | Axial rigidity |
ca M | 579 N/µm | Axial rigidity |
ca H | 775 N/µm | Axial rigidity |
Nodes bearings have FAG B7228-E-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.