FAG B71928-E-T-P4S spindle bearings | 140x190x24mm
Also known as : B71928-E-T-P4S
- Inside Diameter: 140 mm
- Outside Diameter: 190 mm
- Width: 24 mm
- Basic dynamic load rating: 89 kN
- Basic static load rating: 73 kN
FAG B71928-E-T-P4S Bearing
FAG B71928-E-T-P4S Bearing details
Number | B71928-E-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 140 mm | |
D | 190 mm | |
B | 24 mm | |
a | 50,5 mm | |
Da | 181 mm | Tolerance: H12 |
da | 149 mm | Tolerance: h12 |
Etk max | 160,6 mm | |
Etk min | 155,5 mm | |
Etk1 max | 160,6 mm | |
Etk1 min | 155,5 mm | |
r1 min | 1,5 mm | |
ra max | 0,6 mm | |
ra1 max | 0,6 mm | |
rmin | 1,5 mm | |
α | 25 ° | Contact angle |
m | 1,62 kg | ≈ Mass |
Cr | 89000 N | Basic dynamic load rating, radial |
C0r | 73000 N | Basic static load rating, radial |
Cur | 5900 N | Fatigue limit load, radial |
nG Fett | 6000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 9500 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 736 N | Preload force |
FV M | 2564 N | Preload force |
FV H | 5373 N | Preload force |
KaE L | 2136 N | Lift-off force |
KaE M | 7663 N | Lift-off force |
KaE H | 16542 N | Lift-off force |
ca L | 292 N/µm | Axial rigidity |
ca M | 466 N/µm | Axial rigidity |
ca H | 628 N/µm | Axial rigidity |
Nodes bearings have FAG B71928-E-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.