FAG B7228-C-T-P4S spindle bearings | 140x250x42mm
Also known as : B7228-C-T-P4S
- Inside Diameter: 140 mm
- Outside Diameter: 250 mm
- Width: 42 mm
- Basic dynamic load rating: 224 kN
- Basic static load rating: 164 kN
FAG B7228-C-T-P4S Bearing
FAG B7228-C-T-P4S Bearing details
Number | B7228-C-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 140 mm | |
D | 250 mm | |
B | 42 mm | |
a | 47,1 mm | |
Da | 226,5 mm | Tolerance: H12 |
da | 163 mm | Tolerance: h12 |
Etk max | 187 mm | |
Etk min | 175,9 mm | |
Etk1 max | 187 mm | |
Etk1 min | 175,9 mm | |
r1 min | 3 mm | |
ra max | 2,5 mm | |
ra1 max | 2,5 mm | |
rmin | 3 mm | |
α | 15 ° | Contact angle |
m | 7,88 kg | ≈ Mass |
Cr | 224000 N | Basic dynamic load rating, radial |
C0r | 164000 N | Basic static load rating, radial |
Cur | 12100 N | Fatigue limit load, radial |
nG Fett | 5000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 7500 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 1353 N | Preload force |
FV M | 4185 N | Preload force |
FV H | 8302 N | Preload force |
KaE L | 4158 N | Lift-off force |
KaE M | 13825 N | Lift-off force |
KaE H | 29200 N | Lift-off force |
ca L | 155 N/µm | Axial rigidity |
ca M | 257 N/µm | Axial rigidity |
ca H | 362 N/µm | Axial rigidity |
Nodes bearings have FAG B7228-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.