FAG B71928-E-2RSD-T-P4S spindle bearings | 140x190x24mm
Also known as : B71928-E-2RSD-T-P4S
- Inside Diameter: 140 mm
- Outside Diameter: 190 mm
- Width: 24 mm
- Basic dynamic load rating: 89 kN
- Basic static load rating: 73 kN
FAG B71928-E-2RSD-T-P4S Bearing
FAG B71928-E-2RSD-T-P4S Bearing details
| Number | B71928-E-2RSD-T-P4S | |
|---|---|---|
| Type | FAG spindle bearings, adjusted, in pairs or sets | |
| d | 140 mm | |
| D | 190 mm | |
| B | 24 mm | |
| a | 50,5 mm | |
| Da | 181 mm | Tolerance: H12 |
| da | 149 mm | Tolerance: h12 |
| r1 min | 1,5 mm | |
| ra max | 0,6 mm | |
| ra1 max | 0,6 mm | |
| rmin | 1,5 mm | |
| α | 25 ° | Contact angle |
| m | 1,65 kg | ≈ Mass |
| Cr | 89000 N | Basic dynamic load rating, radial |
| C0r | 73000 N | Basic static load rating, radial |
| Cur | 5900 N | Fatigue limit load, radial |
| nG Fett | 6000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 736 N | Preload force |
| FV M | 2564 N | Preload force |
| FV H | 5373 N | Preload force |
| KaE L | 2136 N | Lift-off force |
| KaE M | 7663 N | Lift-off force |
| KaE H | 16542 N | Lift-off force |
| ca L | 292 N/µm | Axial rigidity |
| ca M | 466 N/µm | Axial rigidity |
| ca H | 628 N/µm | Axial rigidity |
Nodes bearings have FAG B71928-E-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, lip seals on both sides, non-contact, restricted tolerances.
FAG B71928-E-2RSD-T-P4S bearing cross reference
FAG B7028-C-T-P4S bearing
140mm x 210mm x 33mm
FAG B71928-C-T-P4S bearing
140mm x 190mm x 24mm
FAG B7228-C-T-P4S bearing
140mm x 250mm x 42mm
FAG B7028-E-T-P4S bearing
140mm x 210mm x 33mm
FAG B71928-E-T-P4S bearing
140mm x 190mm x 24mm
FAG B7228-E-T-P4S bearing
140mm x 250mm x 42mm
FAG B7028-E-2RSD-T-P4S bearing
140mm x 210mm x 33mm
FAG B7028-C-2RSD-T-P4S bearing
140mm x 210mm x 33mm