FAG B7215-C-2RSD-T-P4S spindle bearings | 75x130x25mm
Also known as : B7215-C-2RSD-T-P4S
- Inside Diameter: 75 mm
- Outside Diameter: 130 mm
- Width: 25 mm
- Basic dynamic load rating: 73 kN
- Basic static load rating: 44.5 kN
FAG B7215-C-2RSD-T-P4S Bearing
FAG B7215-C-2RSD-T-P4S Bearing details
Number | B7215-C-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 75 mm | |
D | 130 mm | |
B | 25 mm | |
a | 26,2 mm | |
Da | 120 mm | Tolerance: H12 |
da | 85 mm | Tolerance: h12 |
r1 min | 1,5 mm | |
ra max | 1,5 mm | |
ra1 max | 0,6 mm | |
rmin | 1,5 mm | |
α | 15 ° | Contact angle |
m | 1,24 kg | ≈ Mass |
Cr | 73000 N | Basic dynamic load rating, radial |
C0r | 44500 N | Basic static load rating, radial |
Cur | 4550 N | Fatigue limit load, radial |
nG Fett | 11000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 413 N | Preload force |
FV M | 1314 N | Preload force |
FV H | 2617 N | Preload force |
KaE L | 1278 N | Lift-off force |
KaE M | 4401 N | Lift-off force |
KaE H | 9371 N | Lift-off force |
ca L | 87,2 N/µm | Axial rigidity |
ca M | 148 N/µm | Axial rigidity |
ca H | 210 N/µm | Axial rigidity |
Nodes bearings have FAG B7215-C-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.