FAG B7215-E-2RSD-T-P4S spindle bearings | 75x130x25mm
Also known as : B7215-E-2RSD-T-P4S
- Inside Diameter: 75 mm
- Outside Diameter: 130 mm
- Width: 25 mm
- Basic dynamic load rating: 70 kN
- Basic static load rating: 42.5 kN
FAG B7215-E-2RSD-T-P4S Bearing
FAG B7215-E-2RSD-T-P4S Bearing details
Number | B7215-E-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 75 mm | |
D | 130 mm | |
B | 25 mm | |
a | 36,4 mm | |
Da | 120 mm | Tolerance: H12 |
da | 85 mm | Tolerance: h12 |
r1 min | 1,5 mm | |
ra max | 1,5 mm | |
ra1 max | 0,6 mm | |
rmin | 1,5 mm | |
α | 25 ° | Contact angle |
m | 1,23 kg | ≈ Mass |
Cr | 70000 N | Basic dynamic load rating, radial |
C0r | 42500 N | Basic static load rating, radial |
Cur | 4300 N | Fatigue limit load, radial |
nG Fett | 9500 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 615 N | Preload force |
FV M | 2091 N | Preload force |
FV H | 4345 N | Preload force |
KaE L | 1794 N | Lift-off force |
KaE M | 6306 N | Lift-off force |
KaE H | 13546 N | Lift-off force |
ca L | 204 N/µm | Axial rigidity |
ca M | 325 N/µm | Axial rigidity |
ca H | 439 N/µm | Axial rigidity |
Nodes bearings have FAG B7215-E-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, lip seals on both sides, non-contact, restricted tolerances.