FAG B71915-E-2RSD-T-P4S spindle bearings | 75x105x16mm
Also known as : B71915-E-2RSD-T-P4S
- Inside Diameter: 75 mm
- Outside Diameter: 105 mm
- Width: 16 mm
- Basic dynamic load rating: 33 kN
- Basic static load rating: 22.9 kN
FAG B71915-E-2RSD-T-P4S Bearing
FAG B71915-E-2RSD-T-P4S Bearing details
Number | B71915-E-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 75 mm | |
D | 105 mm | |
B | 16 mm | |
a | 29 mm | |
Da | 99,5 mm | Tolerance: H12 |
da | 81 mm | Tolerance: h12 |
r1 min | 1 mm | |
ra max | 0,6 mm | |
ra1 max | 0,3 mm | |
rmin | 1 mm | |
α | 25 ° | Contact angle |
m | 0,346 kg | ≈ Mass |
Cr | 33000 N | Basic dynamic load rating, radial |
C0r | 22900 N | Basic static load rating, radial |
Cur | 2360 N | Fatigue limit load, radial |
nG Fett | 11000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 235 N | Preload force |
FV M | 897 N | Preload force |
FV H | 1928 N | Preload force |
KaE L | 682 N | Lift-off force |
KaE M | 2688 N | Lift-off force |
KaE H | 5970 N | Lift-off force |
ca L | 156 N/µm | Axial rigidity |
ca M | 257 N/µm | Axial rigidity |
ca H | 351 N/µm | Axial rigidity |
Nodes bearings have FAG B71915-E-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, lip seals on both sides, non-contact, restricted tolerances.