INA rod ends bearings

INA spherical plain bearings

INA rod ends, maintenance-free
Maintenance-free rod ends comprise a housing with integral shank and a maintenance-free spherical plain bearing. The integral shank has an internal or external thread. The spherical plain bearing is firmly seated and located in the housing. The housings and shanks are protected against corrosion by a zinc coating.

INA corrosion-resistant rod ends, maintenance-free
Corrosion-resistant rod ends made from high-grade steel correspond in their construction to the maintenance-free rod ends but are of a corrosion-resistant design.

INA rod ends and hydraulic rod ends, requiring maintenance
Rod ends requiring maintenance comprise a housing with integral shank and a spherical plain bearing requiring maintenance. In other respects, the construction corresponds to that of maintenance-free rod ends.

Displaying 128 INA rod ends bearings.

INA

INA GAL12-DO Rod ends | d:12,d2:34,l2:71mm

Nodes bearings have INA GAL12-DO Rod end bearings in stock, GAL12-DO bearings dimensions: d:12,d2:34,l4:71mm, Cr: 10800N, C0r: 30200N, with external thread, requiring maintenance, to DIN ISO 12 240-4, left hand thread.

Brand: INA
d: 12 mm
d2: 34 mm
Height: 71 mm
Basic dynamic load rating: 10.8 kN
Basic static load rating: 10.8 kN

INA

INA GAL17-DO Rod ends | d:17,d2:46,l2:92mm

Nodes bearings have INA GAL17-DO Rod end bearings in stock, GAL17-DO bearings dimensions: d:17,d2:46,l4:92mm, Cr: 21300N, C0r: 56500N, with external thread, requiring maintenance, to DIN ISO 12 240-4, left hand thread.

Brand: INA
d: 17 mm
d2: 46 mm
Height: 92 mm
Basic dynamic load rating: 21.3 kN
Basic static load rating: 21.3 kN

INA

INA GAL20-DO Rod ends | d:20,d2:53,l2:104.5mm

Nodes bearings have INA GAL20-DO Rod end bearings in stock, GAL20-DO bearings dimensions: d:20,d2:53,l4:104.5mm, Cr: 29600N, C0r: 75600N, with external thread, requiring maintenance, to DIN ISO 12 240-4, left hand thread.

Brand: INA
d: 20 mm
d2: 53 mm
Height: 104.5 mm
Basic dynamic load rating: 29.6 kN
Basic static load rating: 29.6 kN

INA

INA GAL30-DO Rod ends | d:30,d2:73,l2:146.5mm

Nodes bearings have INA GAL30-DO Rod end bearings in stock, GAL30-DO bearings dimensions: d:30,d2:73,l4:146.5mm, Cr: 62300N, C0r: 119000N, with external thread, requiring maintenance, to DIN ISO 12 240-4, left hand thread.

Brand: INA
d: 30 mm
d2: 73 mm
Height: 146.5 mm
Basic dynamic load rating: 62.3 kN
Basic static load rating: 62.3 kN

INA

INA GIL10-DO Rod ends | d:10,d2:29,l4:57.5mm

Nodes bearings have INA GIL10-DO none in stock, with internal thread, requiring maintenance, to DIN ISO 12 240-4, left hand thread, GIL10-DO bearings dimensions: d:10,d2:29,l4:57.5mm, Cr: 8160N, C0r: 22000N.

Brand: INA
d: 10 mm
d2: 29 mm
Height: 57.5 mm
Basic dynamic load rating: 8.16 kN
Basic static load rating: 8.16 kN

INA

INA GIL8-DO Rod ends | d:8,d2:24,l4:48mm

Nodes bearings have INA GIL8-DO none in stock, with internal thread, requiring maintenance, to DIN ISO 12 240-4, left hand thread, GIL8-DO bearings dimensions: d:8,d2:24,l4:48mm, Cr: 5590N, C0r: 16000N.

Brand: INA
d: 8 mm
d2: 24 mm
Height: 48 mm
Basic dynamic load rating: 5.59 kN
Basic static load rating: 5.59 kN

INA

INA GIL17-DO Rod ends | d:17,d2:46,l4:90mm

Nodes bearings have INA GIL17-DO none in stock, with internal thread, requiring maintenance, to DIN ISO 12 240-4, left hand thread, GIL17-DO bearings dimensions: d:17,d2:46,l4:90mm, Cr: 21300N, C0r: 56500N.

Brand: INA
d: 17 mm
d2: 46 mm
Height: 90 mm
Basic dynamic load rating: 21.3 kN
Basic static load rating: 21.3 kN

INA

INA GIL25-DO Rod ends | d:25,d2:64,l4:126mm

Nodes bearings have INA GIL25-DO none in stock, with internal thread, requiring maintenance, to DIN ISO 12 240-4, left hand thread, GIL25-DO bearings dimensions: d:25,d2:64,l4:126mm, Cr: 48300N, C0r: 88300N.

Brand: INA
d: 25 mm
d2: 64 mm
Height: 126 mm
Basic dynamic load rating: 48.3 kN
Basic static load rating: 48.3 kN

INA

INA GIR15-DO Rod ends | d:15,d2:40,l4:81mm

Nodes bearings have INA GIR15-DO none in stock, with internal thread, requiring maintenance, to DIN ISO 12 240-4, right hand thread, GIR15-DO bearings dimensions: d:15,d2:40,l4:81mm, Cr: 16900N, C0r: 44800N.

Brand: INA
d: 15 mm
d2: 40 mm
Height: 81 mm
Basic dynamic load rating: 16.9 kN
Basic static load rating: 16.9 kN

INA

INA GIR20-DO Rod ends | d:20,d2:53,l4:103.5mm

Nodes bearings have INA GIR20-DO none in stock, with internal thread, requiring maintenance, to DIN ISO 12 240-4, right hand thread, GIR20-DO bearings dimensions: d:20,d2:53,l4:103.5mm, Cr: 29600N, C0r: 75600N.

Brand: INA
d: 20 mm
d2: 53 mm
Height: 103.5 mm
Basic dynamic load rating: 29.6 kN
Basic static load rating: 29.6 kN

INA

INA GIR30-DO Rod ends | d:30,d2:73,l4:146.5mm

Nodes bearings have INA GIR30-DO none in stock, with internal thread, requiring maintenance, to DIN ISO 12 240-4, right hand thread, GIR30-DO bearings dimensions: d:30,d2:73,l4:146.5mm, Cr: 62300N, C0r: 119000N.

Brand: INA
d: 30 mm
d2: 73 mm
Height: 146.5 mm
Basic dynamic load rating: 62.3 kN
Basic static load rating: 62.3 kN

INA

INA GIL8-UK Rod ends | d:8,d2:24,l4:48mm

Nodes bearings have INA GIL8-UK none in stock, with internal thread, maintenance-free, to DIN ISO 12 240-4, left hand thread, GIL8-UK bearings dimensions: d:8,d2:24,l4:48mm, Cr: 5850N, C0r: 16000N.

Brand: INA
d: 8 mm
d2: 24 mm
Height: 48 mm
Basic dynamic load rating: 5.85 kN
Basic static load rating: 5.85 kN

INA

INA GIL10-UK Rod ends | d:10,d2:29,l4:57.5mm

Nodes bearings have INA GIL10-UK none in stock, with internal thread, maintenance-free, to DIN ISO 12 240-4, left hand thread, GIL10-UK bearings dimensions: d:10,d2:29,l4:57.5mm, Cr: 8640N, C0r: 22000N.

Brand: INA
d: 10 mm
d2: 29 mm
Height: 57.5 mm
Basic dynamic load rating: 8.64 kN
Basic static load rating: 8.64 kN

INA

INA GIL17-UK Rod ends | d:17,d2:46,l4:90mm

Nodes bearings have INA GIL17-UK none in stock, with internal thread, maintenance-free, to DIN ISO 12 240-4, left hand thread, GIL17-UK bearings dimensions: d:17,d2:46,l4:90mm, Cr: 22500N, C0r: 56500N.

Brand: INA
d: 17 mm
d2: 46 mm
Height: 90 mm
Basic dynamic load rating: 22.5 kN
Basic static load rating: 22.5 kN

INA

INA GIR8-UK Rod ends | d:8,d2:24,l4:48mm

Nodes bearings have INA GIR8-UK none in stock, with internal thread, maintenance-free, to DIN ISO 12 240-4, right hand thread, GIR8-UK bearings dimensions: d:8,d2:24,l4:48mm, Cr: 5850N, C0r: 16000N.

Brand: INA
d: 8 mm
d2: 24 mm
Height: 48 mm
Basic dynamic load rating: 5.85 kN
Basic static load rating: 5.85 kN

INA

INA GIR15-UK Rod ends | d:15,d2:40,l4:81mm

Nodes bearings have INA GIR15-UK none in stock, with internal thread, maintenance-free, to DIN ISO 12 240-4, right hand thread, GIR15-UK bearings dimensions: d:15,d2:40,l4:81mm, Cr: 17800N, C0r: 44800N.

Brand: INA
d: 15 mm
d2: 40 mm
Height: 81 mm
Basic dynamic load rating: 17.8 kN
Basic static load rating: 17.8 kN

INA

INA GIR20-UK Rod ends | d:20,d2:53,l4:103.5mm

Nodes bearings have INA GIR20-UK none in stock, with internal thread, maintenance-free, to DIN ISO 12 240-4, right hand thread, GIR20-UK bearings dimensions: d:20,d2:53,l4:103.5mm, Cr: 31300N, C0r: 75600N.

Brand: INA
d: 20 mm
d2: 53 mm
Height: 103.5 mm
Basic dynamic load rating: 31.3 kN
Basic static load rating: 31.3 kN

INA

INA GIR30-UK Rod ends | d:30,d2:73,l4:146.5mm

Nodes bearings have INA GIR30-UK none in stock, with internal thread, maintenance-free, to DIN ISO 12 240-4, right hand thread, GIR30-UK bearings dimensions: d:30,d2:73,l4:146.5mm, Cr: 65900N, C0r: 139000N.

Brand: INA
d: 30 mm
d2: 73 mm
Height: 146.5 mm
Basic dynamic load rating: 65.9 kN
Basic static load rating: 65.9 kN

INA

INA GIL40-DO-2RS Rod ends | d:40,d2:92,l4:188mm

Nodes bearings have INA GIL40-DO-2RS none in stock, with internal thread, requiring maintenance, to DIN ISO 12 240-4, lip seals on both sides, left hand thread, GIL40-DO-2RS bearings dimensions: d:40,d2:92,l4:188mm, Cr: 99100N, C0r: 194000N.

Brand: INA
d: 40 mm
d2: 92 mm
Height: 188 mm
Basic dynamic load rating: 99.1 kN
Basic static load rating: 99.1 kN

INA

INA GIL50-DO-2RS Rod ends | d:50,d2:112,l4:216mm

Nodes bearings have INA GIL50-DO-2RS none in stock, with internal thread, requiring maintenance, to DIN ISO 12 240-4, lip seals on both sides, left hand thread, GIL50-DO-2RS bearings dimensions: d:50,d2:112,l4:216mm, Cr: 157000N, C0r: 314000N.

Brand: INA
d: 50 mm
d2: 112 mm
Height: 216 mm
Basic dynamic load rating: 157 kN
Basic static load rating: 157 kN

INA

INA GIL80-DO-2RS Rod ends | d:80,d2:180,l4:320mm

Nodes bearings have INA GIL80-DO-2RS none in stock, with internal thread, requiring maintenance, to DIN ISO 12 240-4, lip seals on both sides, left hand thread, GIL80-DO-2RS bearings dimensions: d:80,d2:180,l4:320mm, Cr: 402000N, C0r: 690000N.

Brand: INA
d: 80 mm
d2: 180 mm
Height: 320 mm
Basic dynamic load rating: 402 kN
Basic static load rating: 402 kN

INA

INA GIR40-DO-2RS Rod ends | d:40,d2:92,l4:188mm

Nodes bearings have INA GIR40-DO-2RS none in stock, with internal thread, requiring maintenance, to DIN ISO 12 240-4, lip seals on both sides, right hand thread, GIR40-DO-2RS bearings dimensions: d:40,d2:92,l4:188mm, Cr: 99100N, C0r: 194000N.

Brand: INA
d: 40 mm
d2: 92 mm
Height: 188 mm
Basic dynamic load rating: 99.1 kN
Basic static load rating: 99.1 kN

INA

INA GIR60-DO-2RS Rod ends | d:60,d2:135,l4:242.5mm

Nodes bearings have INA GIR60-DO-2RS none in stock, with internal thread, requiring maintenance, to DIN ISO 12 240-4, lip seals on both sides, right hand thread, GIR60-DO-2RS bearings dimensions: d:60,d2:135,l4:242.5mm, Cr: 245000N, C0r: 485000N.

Brand: INA
d: 60 mm
d2: 135 mm
Height: 242.5 mm
Basic dynamic load rating: 245 kN
Basic static load rating: 245 kN

INA

INA GIR70-DO-2RS Rod ends | d:70,d2:160,l4:280mm

Nodes bearings have INA GIR70-DO-2RS none in stock, with internal thread, requiring maintenance, to DIN ISO 12 240-4, lip seals on both sides, right hand thread, GIR70-DO-2RS bearings dimensions: d:70,d2:160,l4:280mm, Cr: 313000N, C0r: 564000N.

Brand: INA
d: 70 mm
d2: 160 mm
Height: 280 mm
Basic dynamic load rating: 313 kN
Basic static load rating: 313 kN

INA

INA GIL40-UK-2RS Rod ends | d:40,d2:92,l4:188mm

Nodes bearings have INA GIL40-UK-2RS none in stock, with internal thread, maintenance-free, to DIN ISO 12 240-4, lip seals on both sides, left hand thread, GIL40-UK-2RS bearings dimensions: d:40,d2:92,l4:188mm, Cr: 277000N, C0r: 194000N.

Brand: INA
d: 40 mm
d2: 92 mm
Height: 188 mm
Basic dynamic load rating: 277 kN
Basic static load rating: 277 kN

INA

INA GIL50-UK-2RS Rod ends | d:50,d2:112,l4:216mm

Nodes bearings have INA GIL50-UK-2RS none in stock, with internal thread, maintenance-free, to DIN ISO 12 240-4, lip seals on both sides, left hand thread, GIL50-UK-2RS bearings dimensions: d:50,d2:112,l4:216mm, Cr: 442000N, C0r: 313000N.

Brand: INA
d: 50 mm
d2: 112 mm
Height: 216 mm
Basic dynamic load rating: 442 kN
Basic static load rating: 442 kN

INA

INA GIL70-UK-2RS Rod ends | d:70,d2:160,l4:280mm

Nodes bearings have INA GIL70-UK-2RS none in stock, with internal thread, maintenance-free, to DIN ISO 12 240-4, lip seals on both sides, left hand thread, GIL70-UK-2RS bearings dimensions: d:70,d2:160,l4:280mm, Cr: 885000N, C0r: 564000N.

Brand: INA
d: 70 mm
d2: 160 mm
Height: 280 mm
Basic dynamic load rating: 885 kN
Basic static load rating: 885 kN

INA

INA GIR35-UK-2RS Rod ends | d:35,d2:82,l4:166mm

Nodes bearings have INA GIR35-UK-2RS none in stock, with internal thread, maintenance-free, to DIN ISO 12 240-4, lip seals on both sides, right hand thread, GIR35-UK-2RS bearings dimensions: d:35,d2:82,l4:166mm, Cr: 210000N, C0r: 159000N.

Brand: INA
d: 35 mm
d2: 82 mm
Height: 166 mm
Basic dynamic load rating: 210 kN
Basic static load rating: 210 kN

INA

INA GAL10-DO Rod ends | d:10,d2:29,l2:62.5mm

Nodes bearings have INA GAL10-DO Rod end bearings in stock, GAL10-DO bearings dimensions: d:10,d2:29,l4:62.5mm, Cr: 8160N, C0r: 20600N, with external thread, requiring maintenance, to DIN ISO 12 240-4, left hand thread.

Brand: INA
d: 10 mm
d2: 29 mm
Height: 62.5 mm
Basic dynamic load rating: 8.16 kN
Basic static load rating: 8.16 kN

INA

INA GAR10-DO Rod ends | d:10,d2:29,l2:62.5mm

Nodes bearings have INA GAR10-DO Rod end bearings in stock, GAR10-DO bearings dimensions: d:10,d2:29,l4:62.5mm, Cr: 8160N, C0r: 20600N, with external thread, requiring maintenance, to DIN ISO 12 240-4, right hand thread.

Brand: INA
d: 10 mm
d2: 29 mm
Height: 62.5 mm
Basic dynamic load rating: 8.16 kN
Basic static load rating: 8.16 kN

INA

INA GAR20-DO Rod ends | d:20,d2:53,l2:104.5mm

Nodes bearings have INA GAR20-DO Rod end bearings in stock, GAR20-DO bearings dimensions: d:20,d2:53,l4:104.5mm, Cr: 29600N, C0r: 75600N, with external thread, requiring maintenance, to DIN ISO 12 240-4, right hand thread.

Brand: INA
d: 20 mm
d2: 53 mm
Height: 104.5 mm
Basic dynamic load rating: 29.6 kN
Basic static load rating: 29.6 kN

INA

INA GAR30-DO Rod ends | d:30,d2:73,l2:146.5mm

Nodes bearings have INA GAR30-DO Rod end bearings in stock, GAR30-DO bearings dimensions: d:30,d2:73,l4:146.5mm, Cr: 62300N, C0r: 119000N, with external thread, requiring maintenance, to DIN ISO 12 240-4, right hand thread.

Brand: INA
d: 30 mm
d2: 73 mm
Height: 146.5 mm
Basic dynamic load rating: 62.3 kN
Basic static load rating: 62.3 kN

INA

INA GAL8-UK Rod ends | d:8,d2:24,l2:54mm

Nodes bearings have INA GAL8-UK Rod end bearings in stock, GAL8-UK bearings dimensions: d:8,d2:24,l4:54mm, Cr: 5850N, C0r: 12900N, with external thread, maintenance-free, to DIN ISO 12 240-4, left hand thread.

Brand: INA
d: 8 mm
d2: 24 mm
Height: 54 mm
Basic dynamic load rating: 5.85 kN
Basic static load rating: 5.85 kN

INA

INA GAL10-UK Rod ends | d:10,d2:29,l2:62.5mm

Nodes bearings have INA GAL10-UK Rod end bearings in stock, GAL10-UK bearings dimensions: d:10,d2:29,l4:62.5mm, Cr: 8640N, C0r: 20600N, with external thread, maintenance-free, to DIN ISO 12 240-4, left hand thread.

Brand: INA
d: 10 mm
d2: 29 mm
Height: 62.5 mm
Basic dynamic load rating: 8.64 kN
Basic static load rating: 8.64 kN

INA

INA GAL15-UK Rod ends | d:15,d2:40,l2:83mm

Nodes bearings have INA GAL15-UK Rod end bearings in stock, GAL15-UK bearings dimensions: d:15,d2:40,l4:83mm, Cr: 17800N, C0r: 41600N, with external thread, maintenance-free, to DIN ISO 12 240-4, left hand thread.

Brand: INA
d: 15 mm
d2: 40 mm
Height: 83 mm
Basic dynamic load rating: 17.8 kN
Basic static load rating: 17.8 kN

INA

INA GAL17-UK Rod ends | d:17,d2:46,l2:92mm

Nodes bearings have INA GAL17-UK Rod end bearings in stock, GAL17-UK bearings dimensions: d:17,d2:46,l4:92mm, Cr: 22500N, C0r: 56500N, with external thread, maintenance-free, to DIN ISO 12 240-4, left hand thread.

Brand: INA
d: 17 mm
d2: 46 mm
Height: 92 mm
Basic dynamic load rating: 22.5 kN
Basic static load rating: 22.5 kN

INA

INA GAL20-UK Rod ends | d:20,d2:53,l2:104.5mm

Nodes bearings have INA GAL20-UK Rod end bearings in stock, GAL20-UK bearings dimensions: d:20,d2:53,l4:104.5mm, Cr: 31300N, C0r: 75600N, with external thread, maintenance-free, to DIN ISO 12 240-4, left hand thread.

Brand: INA
d: 20 mm
d2: 53 mm
Height: 104.5 mm
Basic dynamic load rating: 31.3 kN
Basic static load rating: 31.3 kN

INA

INA GAL25-UK Rod ends | d:25,d2:64,l2:126mm

Nodes bearings have INA GAL25-UK Rod end bearings in stock, GAL25-UK bearings dimensions: d:25,d2:64,l4:126mm, Cr: 51100N, C0r: 105000N, with external thread, maintenance-free, to DIN ISO 12 240-4, left hand thread.

Brand: INA
d: 25 mm
d2: 64 mm
Height: 126 mm
Basic dynamic load rating: 51.1 kN
Basic static load rating: 51.1 kN